VJ Source Energy Capacitor (SEC)
www.vishay.com
Vishay Vitramon
Revision: 25-May-2018
1
Document Number: 45210
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Surface Mount Multilayer Ceramic Capacitors
for Pulse Current Applications
FEATURES
•
Low electrostrictive ceramic formulation for
repeated charge and discharge cycles
• High pulse discharge currents
• Excellent reliability and high voltage performance
• Available with tin / lead barrier termination (code “L”)
• Wet built process
• Reliable Noble Metal Electrode (NME) system
• Made with a combination of design, materials and tight
process control to achieve very high field reliability
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
APPLICATIONS
• Power supplies
• Converters
• Voltage multipliers
ELECTRICAL SPECIFICATIONS
Note
• Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Capacitance Range: 4.7 nF to 560 nF
Voltage Range: 1000 V
DC
, 1500 V
DC
Temperature Coefficient of Capacitance (TCC):
X7R: ± 15 % from -55 °C to +125 °C, with 0 V
DC
applied
Dissipation Factor (DF):
2.5 % max. at 1.0 V
RMS
and 1 kHz
Aging Rate: 1 % maximum per decade
Insulation Resistance (IR):
at +25 °C and rated voltage: 100 000 M minimum or
1000 F, whichever is less
at +125 °C and rated voltage: 10 000 M minimum or
100 F, whichever is less
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E.
Applied test voltages:
1000 V
DC
/ 1500 V
DC
-rated: min. 120 % of rated voltage
Available
Available