LTM4600HV
1
4600hvfe
For more information www.linear.com/LTM4600HV
LOAD CURRENT (A)
0
EFFICIENCY (%)
6
4600HV TA01b
2 4 8
10
80
90
100
70
60
50
40
30
1.8V
OUT
2.5V
OUT
3.3V
OUT
5V
OUT
10A, 28V
IN
High Efficiency
DC/DC µModule
The LT M
®
4600HV is a complete 10A, DC/DC step down
power supply with up to 28V input operation. Included
in the package are the switching controller, power FETs,
inductor, and all support components. Operating over
an input voltage range of 4.5V to 28V, the LTM4600HV
supports an output voltage range of 0.6V to 5V, set by a
single resistor. This high efficiency design delivers 10A
continuous current (12A peak), needing no heat sinks or
airflow to meet power specifications. Only bulk input and
output capacitors are needed to finish the design.
The low profile package (2.82mm) enables utilization of
unused space on the bottom of PC boards for high density
point of load regulation. High switching frequency and an
adaptive on-time current mode architecture enables a very
fast transient response to line and load changes without
sacrificing stability. Fault protection features include
integrated overvoltage and short circuit protection with
a defeatable shutdown timer. A built-in soft-start timer is
adjustable with a small capacitor.
The LTM4600HV is packaged in a compact (15mm ×
15mm) and low profile (2.82mm) over-molded Land Grid
Array (LGA) package suitable for automated assembly by
standard surface
mount equipment. The LTM4600HV is
RoHS compliant.
n
Telecom and Networking Equipment
n
Military and Avionics Systems
n
Industrial Equipment
n
Point of Load Regulation
n
Servers
n
Complete Switch Mode Power Supply
n
Wide Input Voltage Range: 4.5V to 28V
n
10A DC, 12A Peak Output Current
n
Parallel Tw o µModule™ DC/DC Converters for 20A
Output Current
n
0.6V to 5V Output Voltage
n
1.5% Output Voltage Regulation
n
Ultrafast Transient Response
n
Current Mode Control
n
–55°C to 125°C Operating Temperature Range
(LTM4600HVMPV)
n
RoHS Compliant Package with Gold Pad Finish (e4)
n
Up to 92% Efficiency
n
Programmable Soft-Start
n
Output Overvoltage Protection
n
Optional Short-Circuit Shutdown Timer
n
Small Footprint, Low Profile (15mm × 15mm ×
2.82mm) LGA Package
10A µModule Power Supply with 4.5V to 28V Input
Efficiency vs Load Current with 24V
IN
(FCB = 0)
V
IN
C
IN
4600hv TA01a
LTM4600HV
PGND SGND
V
OUT
V
OSET
V
IN
4.5V TO 28V
ABSMAX
OUT
2.5V*
10A
C
OUT
31.6k
*REVIEW DE-RATING CURVE AT
THE HIGHER INPUT VOLTAGE
L, LT , LTC , LT M, µModule and OPTI-LOOP are registered trademarks of Linear Technology
Corporation. All other trademarks are the property of their respective owners.
Typical applicaTion
applicaTions
FeaTures DescripTion