Rev Date: 11/14/2016
2 www.seielect.com
This specification may be changed at any time without prior notice marketing@seielect.com
Please confirm technical specifications before you order and/or use.
TO-220 and TO-247 Style Power Resistor
Stackpole Electronics, Inc.
Resistive Product Solutions
Mounting Note:
(1) When mounting ensure entire ceramic portion of case is mounted on a clean, flat heat sink with an appropriate
thermal interface, such as thermal grease. For screw mounting use of a compression washer at a force of 150 to
300lbs (665 to 1330N) is recommended without exceeding mounting torque of 8 in-lbs (0.9 N-m) to avoid package
damage. For clip mounting use of a round or smooth clip in contact area is recommended to avoid a concentrated
hot spot on package.
(2) TR50/100 must be mounted to heat sink using proper mounting clip for efficient heat dissipation.
Mechanical Specifications
0.410
±
0.010 0.410
±
0.010 0.400
± 0.010
0.410
± 0.010 0.410
±
0.010 0.620
±
0.010 inches
10.41 ± 0.26
10.41 ± 0.26
10.16
± 0.25
10.41 ± 0.26 10.41
± 0.26 15.75
± 0.26 mm
0.640
± 0.010 0.640
± 0.010 0.581 ± 0.010 0.640 ±
0.010 0.640 ±
0.010 0.815 ± 0.010 inches
16.26 ± 0.26
16.26 ± 0.26 14.75
± 0.25 16.26 ± 0.26 16.26 ±
0.26 20.70 ±
0.26 mm
0.125 ±
0.010 0.125 ±
0.010 0.175 ±
0.015 0.125 ± 0.010 0.125 ± 0.010
0.195 ± 0.010 inches
3.18 ± 0.26
3.18 ± 0.26
4.44
± 0.38 3.18
± 0.26 3.18 ±
0.26 4.95 ±
0.26 mm
0.050 ±
0.005 0.050 ± 0.005
0.050
±
0.005 0.050 ±
0.005 0.050 ±
0.005 0.143 ± 0.007 inches
1.27
± 0.13 1.27
± 0.13 1.27
±
0.13 1.27 ±
0.13 1.27 ± 0.13
3.63 ± 0.18
mm
0.030 ± 0.004
0.030 ± 0.004 0.031 ±
0.003 0.030 ± 0.004 0.030
± 0.004 0.060 ± 0.004 inches
0.76 ±
0.10 0.76 ± 0.10
0.78 ± 0.08 0.76 ±
0.10 0.76 ± 0.10 1.52 ±
0.10 mm
0.200
± 0.010 0.200 ± 0.010
0.200 ± 0.010 0.200
± 0.010 0.200 ± 0.010
0.400 ± 0.010
inches
5.08 ± 0.26 5.08 ± 0.26
5.08 ± 0.26 5.08 ±
0.26 5.08 ± 0.26 10.16
± 0.26 mm
0.130 ± 0.030 0.130 ± 0.030
0.130 ± 0.030 0.130 ± 0.030
0.130 ± 0.030 0.110 ±
0.030 inches
3.30 ± 0.76
3.30 ± 0.76 3.30 ±
0.76 3.30 ±
0.76
3.30
± 0.76 2.79 ± 0.76 mm
0.500
± 0.050
0.500 ± 0.050 0.539 ± 0.039
0.500 ± 0.050 0.500 ±
0.050 0.570 ±
0.050
inches
12.70 ± 1.27 12.70 ± 1.27 13.70 ± 1.00
12.70 ± 1.27
12.70
± 1.27
14.48 ± 1.27 mm
0.020 ±
0.004 0.020 ± 0.004
0.024 ± 0.003 0.020 ± 0.004
0.020
± 0.004 0.032
± 0.010 inches
0.50 ± 0.10
0.50
± 0.10 0.62 ±
0.08 0.50 ± 0.10 0.50 ±
0.10 0.81
±
0.26 mm
0.070 ±
0.010 0.070 ± 0.010 0.090 ±
0.010 0.070 ± 0.010 0.070 ± 0.010 0.095 ± 0.010 inches
1.78 ± 0.26 1.78 ± 0.26
2.28
± 0.25 1.78 ±
0.26 1.78
±
0.26 2.41 ±
0.26 mm
0.125
± 0.004 0.144 ± 0.004 0.125 ±
0.004 0.143
± 0.007 inches
3.18 ± 0.10 3.65
± 0.10 3.18 ± 0.10 3.63 ±
0.18 mm
0.125 ± 0.010
0.116 ± 0.004 0.125 ± 0.010 0.210 ±
0.010 inches
3.18
± 0.26 2.95 ± 0.10 3.18 ± 0.26 5.33 ± 0.26 mm
0.051 ± 0.004 inches
1.30 ± 0.10 mm
0.240 ± 0.004
inches
6.10
± 0.10 mm