UG-863 ADP2389-EVALZ/ADP2390-EVALZ User Guide
Rev. 0 | Page 8 of 8
Table 3. ADP2390 Bill of Materials
Qty. Reference Designator Description Part Number/Vendor
2 C1, C7 0.1 μF, 16 V, capacitor, 0603 GRM188R71C104KA01D/Murata
2 C2, C18 Optional, capacitor, 0603 Optional/Murata
1 C3 22 nF, 16 V, capacitor, 0603 GRM188R71C223KA01D/Murata
1 C4 22 pF, 50 V, capacitor, 0603 GRM1885C1H220JA01D/Murata
1 C5 1.5 nF, 25 V, capacitor, 0603 GRM188R71E152KA01D/Murata
1 C6 1 μF, 16 V, capacitor, 0603 GRM188R61C105KA93D/Murata
5 C8, C9, C10, C11, C12 10 μF, 25 V, capacitor, 1206 GRM31CR61E106MA12L/Murata
5 C13, C14, C15, C16, C17 100 μF, 6.3 V, capacitor, 1210 GRM32ER60J107ME20L/Murata
1 L1
Inductor, 7443320100, L = 1 μH, I
SAT
= 32 A,
DCR = 1.17 mΩ
7443320100/Würth Elektronik
4 R1, R3, R4, R8 Optional, resistor, 0603 Optional/Vishay Dale
2 R2, R5 10 kΩ, 1%, resistor, 0603 CRCW060310K0FKEA/Vishay Dale
1 R6 121 kΩ, 1%, resistor, 0603 CRCW0603121KFKEA/Vishay Dale
1 R7 59 kΩ, 1%, resistor, 0603 CRCW060359K0FKEA /Vishay Dale
1 R9 20 kΩ, 1%, resistor, 0603 CRCW060320K0FKEA/Vishay Dale
1 R10 27.4 kΩ, 1%, resistor, 0603 CRCW060327K4FKEA/Vishay Dale
1 R11 0 Ω, 0.1 W, resistor, 0603 CRCW06030000Z0EA/Vishay Dale
1 R12 6.8 Ω, 1%, resistor, 0603 CRCW06036R80FKEA/Vishay Dale
1 U1
18 V, 12 A, synchronous, step-down regulator,
32-lead, LFCSP_VQ, with exposed paddles
ADP2390/Analog Devices, Inc.
11 J1, J2, J3, J4, J6, J8, J9, J10, J11, J13, J16
Test point, 2.54 mm pitch SIL vertical PC tail pin
header, 6.1 mm mating pin height, tin, SIP1
M20-9990245/Harwin
1 J5 Jumper, 0.1-inch header, 3-way, SIP3 M20-9990346/Harwin
4 J7, J12, J14, J15 Terminal screw vertical PC mount 8191/Keystone Electronics
ESD Caution
ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection
circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.
Legal Terms and Conditions
By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and conditions
set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you
have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc.
(“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal,
temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided
for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional
limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term
“Third Party” includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including
ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may
not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to
promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any
occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board.
Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice
to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO
WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED
TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL
PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S POSSESSION OR USE OF
THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE
AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable
United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of
Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby
submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed.
©2015 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
UG13375-0-9/15(0)
