AT91SAM7A3-EK Evaluation Board User Guide 2-1
6165C–ATARM–26-Jun-06
Section 2
Setting Up the AT91SAM7A3-EK
Evaluation Board
2.1 Electrostatic
Warning
The AT91SAM7A3-EK evaluation board is shipped in a protective anti-static package.
The board must not be subjected to high electrostatic potentials. A grounding strap or
similar protective device should be worn when handling the board. Avoid touching the
component pins or any other metallic element.
2.2 Requirements In order to set up the AT91SAM7A3-EK evaluation board, the following items are
required:
! the AT91SAM7A3-EK evaluation board itself
! an A/B-type USB cable
or
! a DC USB power adapter (5V at 0.5 A) with USB A/B cable
Note: The AT91SAM7A3-EK is not delivered with a JTAG/ICE interface which is
required to start evaluating the device.
