CS8140, CS8141
http://onsemi.com
16
PACKAGE DIMENSIONS
TO−220−7
THA SUFFIX
CASE 821H−02
ISSUE A
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION D DOES NOT INCLUDE
INTERCONNECT BAR (DAMBAR) PROTRUSION.
DIMENSION D INCLUDING PROTRUSION SHALL
NOT EXCEED 10.92 (0.043) MAXIMUM.
1. LEADS MAINTAIN A RIGHT ANGLE WITH
RESPECT TO THE PACKAGE BODY TO WITH
$0.020".
A
U
D
G
B
T
M
0.356 (0.014)
M
Q
7 PL
−Q−
K
F
J
C
E
−T−
N
L
M
W
S
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A 0.560 0.590 14.22 14.99
B 0.385 0.415 9.77 10.54
C 0.160 0.190 4.06 4.82
D 0.023 0.037 0.58 0.94
E 0.045 0.055 1.14 1.40
F 0.568 0.583 14.43 14.81
G 0.050 BSC 1.27 BSC
J 0.015 0.022 0.38 0.56
K 0.728 0.743 18.49 18.87
L 0.322 0.337 8.18 8.56
M 0.101 0.116 2.57 2.95
N 0.090 0.115 2.28 2.91
Q 0.146 0.156 3.70 3.95
S 0.150 0.200 3.81 5.08
U 0.460 0.475 11.68 12.07
W 33°°
D
2
PAK−7
DPS SUFFIX
CASE 936AB−01
ISSUE O
For D
2
PAK Outline and
Dimensions − Contact Factory
CS8140, CS8141
http://onsemi.com
17
PACKAGE DIMENSIONS
SO−24L
DW SUFFIX
CASE 751E−04
ISSUE E
DIP−14
N SUFFIX
CASE 646−04
ISSUE M
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSIONS A AND B DO NOT INCLUDE
MOLD PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 (0.006)
PER SIDE.
5. DIMENSION D DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.13 (0.005) TOTAL IN
EXCESS OF D DIMENSION AT MAXIMUM
MATERIAL CONDITION.
−A−
−B− P12X
D24X
12
1324
1
M
0.010 (0.25) B
M
S
A
M
0.010 (0.25) B
S
T
−T−
G22X
SEATING
PLANE
K
C
R
X 45
_
M
F
J
DIM MIN MAX MIN MAX
INCHESMILLIMETERS
A 15.25 15.54 0.601 0.612
B 7.40 7.60 0.292 0.299
C 2.35 2.65 0.093 0.104
D 0.35 0.49 0.014 0.019
F 0.41 0.90 0.016 0.035
G 1.27 BSC 0.050 BSC
J 0.23 0.32 0.009 0.013
K 0.13 0.29 0.005 0.011
M 0 8 0 8
P 10.05 10.55 0.395 0.415
R 0.25 0.75 0.010 0.029
____
17
14 8
B
A
F
HG
D
K
C
L
M
SEATING
PLANE
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A 0.715 0.740 18.16 18.80
B 0.240 0.260 6.10 6.60
C 0.160 0.180 4.06 4.57
D 0.015 0.020 0.38 0.51
F 0.040 0.060 1.02 1.52
G 0.100 BSC 2.54 BSC
H 0.052 0.072 1.32 1.83
J 0.008 0.012 0.20 0.30
K 0.115 0.135 2.92 3.43
L
M −−− 10 −−− 10
N 0.020 0.040 0.51 1.02
__
N
−T−
14 PL
M
0.13 (0.005)
J
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION L TO CENTER OF LEADS WHEN
FORMED PARALLEL.
4. DIMENSION B DOES NOT INCLUDE MOLD FLASH.
5. ROUNDED CORNERS OPTIONAL.
0.290 0.310 7.37 7.87
CS8140, CS8141
http://onsemi.com
18
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
CS8140/D
SMART REGULATOR is a registered trademark of Semiconductor Components Industries, LLC (SCILLC).
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
For additional information, please contact your
local Sales Representative.

CS8141YDPSR7

Mfr. #:
Manufacturer:
ON Semiconductor
Description:
IC REG LINEAR 5V 500MA D2PAK-7
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union