Reverse Voltage: 20 - 60 Volts
Forward Current: 2.0 Amp
CDBHD220-G Thru 260-G
Features
Mechanical Data
SMD DIODE SPECIALIST
COMCHIP
MDS0703001A
• Schottky barrier chips in bridge
• Metal-Semiconductor junction with guard ring
• Highsurge current capability
• Silicon epitaxial planar chips
• For use in low voltage, high efficiency inverters, free
wheeling, and polarity protection applications
• Lead-free part, meet RoHS requirements
• Case: Mini-Dip bridge (TO-269AA) plastic molded case
• Epoxy: UL94-V0 rated flame retardant
• Terminals: Solderable per MIL-STD-750 Method 2026
• Polarity: As marked on body
• Mounting Position: Any
• Weight: 0.0078 ounces, 0.22 grams
Unit :inch(mm)
.008(0.2)
Max.
.106(2.7)
.090(2.3)
.114(2.90)
.094(2.40)
.051(1.3)
.035(0.9)
.193(4.90)
.177(4.50)
.067(1.7)
.057(1.3)
.031(0.8)
.019(0.5)
.016(0.41)
.006(0.15)
+ –
.165( 4 . 2 )
.150( 3 . 8 )
.275( 7 . 0 )
Max.
~ ~
.043(1.1)
.027(0.7)
.106(2.7)
.090(2.3)
C .02(0.5)
~
+
~
–
Mini-DIP
CDBHD - Symbols 220 240 260 Units
Maximum Recurrent Peak Reverse Voltage VRRM 20 40 60 Volts
Maximum RMS Voltage VRMS 14 28 42 Volts
Maximum DC Blocking Voltage VDC 20 40 60 Volts
Maximum Average Forward Rectified Current
0.2x0.2” (5.0x5.0mm) copper pad area, see Figure 1
Peak Forward Surge Current
8.3mS single half sine-wave superimposed on IFSM 50.0 Amps
rated load (JEDEC Me thod)
Maximum Forward Voltage at 1.0A (Note 1) VF 0.50 0.70 Volts
Maximum DC Reverse Current TA= 25°C
at Rated DC Blocking Voltage TA= 100°C
Typical Junction Capacitance (Note 2) CJ 150 pF
Typical Thermal Resistance (Note 3) RθJA 85.0
RθJL 20.0
Operating Junction Temperature Range TJ -55 ~ +125 °C
Storage Temperature Range TSTG -55 ~ +150 °C
MAXIMUM RATING AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified
IAV 2.0 Amps
IR mA
°C/W
0.5
20.0
:
Note 1. Pulse test: 300µS pu lse wi dth, 1% du ty cy cle
2. Me asured at 1.0MH z and ap plied reverse vo ltage of 4.0 Volts
3. Thermal resistance from junction to am bient and from junction to lead P.C.B. mo unted on 0.2x0.2”(5.0x5.0mm ) copper pa d areas.
Schottky Bridge Rectifiers