RV (ARV)
–3–
ASCTB107E 201407-T
RATING
1. Coil data
1) Failsafe type (Standard contact and Reverse contact)
2) Latching type (Standard contact)
Notes: *1. Pulse drive (JIS C5442)
*2. Please inquire regarding use with nominal operating voltage of 28 V DC.
2. Specifications
Notes: *1. Factors such as heating of the connected terminal influence the high frequency characteristics; therefore, please verify under actual conditions of use.
*2. Measuring method: After installing on dedicated inspection equipment
*3. 8 to 18GHz characteristics can be applied 18GHz type only.
*4. 8 to 18GHz characteristics can be applied 18GHz and 26.5GHz types only.
*5. 18 to 26.5GHz characteristics can be applied 26.5GHz type only.
*6. The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Refer to “NOTES”.
Nominal operating
voltage
Pick-up voltage
(at 20°C 68°F)
Drop-out voltage
(at 20°C 68°F)
Nominal operating
current
[±10%] (at 20°C 68°F)
Coil resistance
[±10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 85°C 185°F)
4.5 V DC
75%V or less
of nominal voltage*
1
(Initial)
10%V or more
of nominal voltage*
1
(Initial)
155.7 mA 28.9 Ω
700 mW
110%V
of nominal voltage
12 V DC 58.3 mA 205.7 Ω
24 V DC 29.2 mA 822.9 Ω
Nominal operating
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Nominal operating
current
[±10%] (at 20°C 68°F)
Coil resistance
[±10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 85°C 185°F)
4.5 V DC
75%V or less
of nominal voltage*
1
(Initial)
75%V or less
of nominal voltage*
1
(Initial)
155.7 mA 28.9 Ω
700 mW
110%V
of nominal voltage
12 V DC 58.3 mA 205.7 Ω
24 V DC 29.2 mA 822.9 Ω
Characteristics Item Specifications
Contact
Arrangement SPDT
Contact material Gold plating
Contact resistance (Initial) Max. 100mΩ (By voltage drop 10V AC 10mA)
Rating
Contact input power (CW) Max. 50W (at 3GHz) (V.S.W.R. 1.3 or less, no contact switching, ambient temperature 20°C 68°F)*
1
Nominal operating power 700mW
High frequency
characteristics
(Impedance 50Ω)
PIN type*
2
SMA type
Frequency to 4 GHz 4 to 8 GHz
8 to 12.4
GHz*
3
12.4 to 18
GHz*
3
to 8 GHz
8 to 12.4
GHz*
4
12.4 to 18
GHz*
4
18 to 26.5
GHz*
5
V.S.W.R. (max.) 1.3 1.4 1.5 1.7 1.35 1.6 1.7 1.8
Insertion loss (dB, max.) 0.3 0.4 0.5 0.7 0.3 0.5 0.7 0.8
Isolation (dB, min.) 70 60 50 40 70 60 60 50
Electrical
characteristics
Insulation resistance (Initial) Min. 1,000 MΩ (at 500 V DC) Measurement at same location as “breakdown voltage (Initial)” section.
Breakdown
voltage
(Initial)
Between open
contacts
500 Vrms for 1 min. (Detection current: 10mA)
Between contact
and earth terminal
500 Vrms for 1 min. (Detection current: 10mA)
Between contact
and coil
500 Vrms for 1 min. (Detection current: 10mA)
Between coil and
earth terminal
500 Vrms for 1 min. (Detection current: 10mA)
Time characteristics
(at 20°C 68°F)
Operate time (Set time) Max. 15ms (approx. 5ms) (Nominal operating voltage applied to the coil, excluding contact bounce time.)
Release time (Reset time)
Max. 15ms (approx. 5ms) (Nominal operating voltage applied to the coil, excluding contact bounce time.)
(without diode, only for Release time)
Mechanical
characteristics
Shock
resistance
Functional Min. 500 m/s
2
(Half-wave pulse of sine wave: 11ms, detection time: 10μs.)
Destructive Min. 1,000 m/s
2
(Half-wave pulse of sine wave: 6ms.)
Vibration
resistance
Functional 10 to 55 Hz at double amplitude of 3mm (Detection time: 10μs.)
Destructive 10 to 55 Hz at double amplitude of 5mm/15 to 2,000 Hz [W0 = 2.94 (m/s
2
)
2
/Hz]
Expected life
Mechanical Min. 10
6
(at 180 cpm)
Electrical (Hot switch) Min. 3 × 10
5
(1W High frequency load, at 3GHz, impedance 50Ω, V.S.W.R.; max. 1.3) (at 20 cpm)
Conditions
Conditions for operation,
transport and storage*
6
Ambient temperature: –55°C to +85°C –67°F to +185°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Air pressure: 86 to 106 kPa
Unit weight PIN type: Approx. 12g .42oz SMA type: Approx. 20g .71oz