SPEC NO: DSAN2009 REV NO: V.2B DATE: APR/22/2015 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1203013772
Selection Guide
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
Iv (mcd) [2]
@ 20mA
iewing
Angle [1]
Min. Typ. 2θ1/2
APGA1602SYC/KA Super Bright Yellow (AlGaInP) Water Clear 40 75
160
°(H)
120
°(V)
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Super Bright Yellow 591
nm I
F=20mA
λD [1] Dominant Wavelength Super Bright Yellow 589
nm I
F=20mA
Δλ1/2 Spectral Line Half-width Super Bright Yellow 15
nm I
F=20mA
V
F [2] Forward Voltage Super Bright Yellow 2.05 2.4 V IF=20mA
I
R Reverse Current Super Bright Yellow
10 uA VR=5V
Parameter Super Bright Yellow Units
Power dissipation 48 mW
DC Forward Current 20 mA
Peak Forward Current [1] 100 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +100°C
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
