1
pulseelectronics.com
Isolation Power Transformers
Toroid Platform SMD
Push Pull Converter Transformer
Patent Pending Sidecar Construction
IEC 60950 and 61558 basic insulation compliant,
12mm creepage
4KVrms isolation (600Vrms continuous)
USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 62787060 China 86 755 33966678 Taiwan 886 3 4356768
Electrical Specifications @ 25°C - Operating Temperature -40°C to +125°C
Part
Number
Inductance
(1-4)
(µH ±35%)
Leakage Inductance
(1-4) with
(5-8) shorted
(µH MAX)
Capacitance
(1, 4) to (5, 8)
(pF MAX)
DCR (1-4)
(Ω MAX)
DCR (5-8)
(Ω MAX)
MAX (1-4)
1
(V-µsec Max)
Turns Ratio
(1:4) (8:5)
Isolated Voltage
2
(Vrms)
PH9385.011NL 3200 6.0 36 1.10 1.00 109 1CT : 1CT
PH9385.045NL 3200 4.0 36 1.10 1.25 109 4CT : 5CT
PH9385.034NL 2600 3.0 36 1.00 1.50 98 3CT : 4CT
PH9385.012NL 2600 3.0 40 1.00 1.90 98 1CT : 2CT
PH9385.038NL 2600 3.0 40 1.00 2.20 98 3CT : 8CT
PH9385.013NL 2600 3.0 40 1.00 2.75 98 1CT : 3CT
PH9385.027NL 2600 3.0 40 1.00 3.00 98 2CT : 7CT
PH9385.015NL 1350 3.0 30 0.80 3.20 70 1CT :5CT
Notes:
1. The maximum volt-usec rating limits the peak flux density to 3600 gauss when used in
bi-polar drive application with 200KHz. For unipolar drive applications or a bi-polar drive
with 350kHz, a maximum volt-usec could be 60% of the listed value. For Push-Pull top-
ology, where the voltage is applied across half the primary winding turns, the maximum
volts-use needs to be derated by 50%.
2. The AEC-Q200 temperature and humidity operational life testing was completed using a
dielectric strength test of 4000Vdc.
3. Optional Tape & Reel packing can be ordered by adding a “T” sux to the part
number (i.e. PH9385.011NL becomes PH9385.011NLT). Pulse complies to industry
standard tape and reel specification EIA481.
4. The “NL” sux indicates an RoHS-compliant part number.
5. Continuous isolation voltage confirmed by 125°C/1000hrs accelerated aging
with the bias voltage applied between primary and secondary windings.
PH9385.0XXNL
Mechanical Schematic
4
7
PIN 1 ID
6
67
23
.600
[15.25]
[3.75]
.006[0.15] MIN
.630 MAX
[16 MAX]
.591±.012
[15.00±0.30]
(.030)
[0.75]
6X.148±.010
[3.75±0.25]
.295 MAX
[7.5 MAX]
8 SURFACES
.005[0.13]
.079
[2.00]
.079
[2.00]
.669 MAX
X]
PH9385.0xxNL
DATE CODE ORIGIN
PAT. PEND.
Weight .............................2.5/grams
Tape & Reel ........................300/reel
Tray ......................................80/tray
Dimensions:
Unless otherwise specified,
all tolerances are ±
Inches
mm
.010
0,25
4000
2
1
4
6
8
5
3
7