LQH5BPB1R5NT0L Datasheet LQH5BPB2R2NT0L, LQH5BPB6R8NT0L, LQH5BPB1R0NT0L | P1-P3

SpecNo.JELF243A-0108D-01 P1/8

MURATA MFG.CO., LTD

Reference Only

1.Scope

This reference specification applies to LQH5BPB_T0 Series, Chip coil (Chip Inductors).

2.Part Numbering

(ex) LQ H 5B P B R47 N T0 L

Product ID Structure Dimension Applications Category Inductance Tolerance Dimension Packaging

(L×W) and (T) L:Taping(φ180mm/reel)

Characteristics K:Taping (φ330mm/reel)

3.Rating

・Operating Temperature Range.

(Ambient temperature; Self-temperature rise is not included) -40 to +105°C

(Product temperature; Self- temperature rise is included) -40 to +125°C

・Storage Temperature Range.

-40 to +125°C

Customer

Part Number

MURATA

Part Number

Inductance

(µH)

Tolerance

(

Resistance

()

Self

Resonant

Frequency

(MHz min)

∗3 Rated Current (A)

∗1

Based on

Inductance

change

∗2 Based on

Temperature rise

Ambient

temperature

85℃

Ambient

temperature

105℃

LQH5BPBR47NT0L

0.47

N:±30

0.012±20% 220 7.7 4.0 2.05

LQH5BPBR47NT0K

LQH5BPB1R0NT0L

1.0 0.019±20% 90 5.8 3.1 1.68

LQH5BPB1R0NT0K

LQH5BPB1R2NT0L

1.2 0.019±20% 90 5.4 3.1 1.68

LQH5BPB1R2NT0K

LQH5BPB1R5NT0L

1.5 0.024±20% 70 5.0 3.0 1.63

LQH5BPB1R5NT0K

LQH5BPB2R2NT0L

2.2 0.030±20% 55 4.0 2.6 1.37

LQH5BPB2R2NT0K

LQH5BPB2R7NT0L

2.7 0.035±20% 50 3.8 2.5 1.23

LQH5BPB2R7NT0K

LQH5BPB3R3NT0L

3.3 0.044±20% 40 3.5 2.3 1.21

LQH5BPB3R3NT0K

LQH5BPB4R7NT0L

4.7 0.058±20% 40 3.0 2.0 1.09

LQH5BPB4R7NT0K

LQH5BPB6R8NT0L

6.8 0.083±20% 30 2.5 1.65 0.96

LQH5BPB6R8NT0K

LQH5BPB100MT0L

M:±20

0.106±20% 25 2.0 1.60 0.87

LQH5BPB100MT0K

LQH5BPB150MT0L

15 0.187±20% 18 1.6 1.20 0.62

LQH5BPB150MT0K

LQH5BPB220MT0L

22 0.259±20% 15 1.4 1.05 0.55

LQH5BPB220MT0K

∗1: When applied Rated current to the Products, Inductance will be within ±30% of nominal Inductance value.

∗2: When applied Rated current to the Products ,temperature rise caused by self-generated heat shall be limited

to 40 max.℃

∗3: Keep the temperature（ambient temperature plus self-generation of heat) under 125 .℃

CHIP COIL(CHIP INDUCTORS) LQH5BPB□□□□T0□ REFERENCE SPECIFICATION

SpecNo.JELF243A-0108D-01 P2/8

MURATA MFG.CO., LTD

Reference Only

4. Testing Conditions

《Unless otherwise specified》《In case of doubt》

Temperature : Ordinary Temperature (15 to 35°C) Temperature : 20 ± 2°C

Humidity : Ordinary Humidity (25 to 85 % (RH)) Humidity : 60 to 70 %

(RH)

Atmospheric Pressure : 86 to 106 kPa

5. Appearance and Dimensions

※No Marking.

■Unit Mass (Typical value)

0.22ｇ

(in mm)

6.Electrical Performance

No. Item Specification Test Method

6.1 Inductance Inductance shall meet item 3. Measuring Equipment : KEYSIGHT 4284A or equivalent

Measuring Frequency: 100kHz

6.2 DC Resistance DC Resistance shall meet item 3. Measuring Equipment:Digital multi meter

6.3 Self Resonant

Frequency

(S.R.F)

S.R.F shall meet item 3. Measuring Equipment: KEYSIGHT E4991A or equivalent

7.Mechanical Performance

No. Item Specification Test Method

7.1 Shear Test Chip coil shall not be damaged. Substrate: Glass-epoxy substrate

Applied Direction :

Force: 10N

Hold Duration: 5±1s

7.2 Bending Test Substrate:Glass-epoxy substrate

(100×40×1.6mm)

Speed of Applying Force: 0.5mm / s

Deflection: 2mm

Hold Duration: 5seconds.

(in mm)

Ｆ

Chip coil

Substrate

R230

Deflection

Product

Pressure jig

5.0±0.2

（0.2）

2.0±0.2

5.0±0.2

1.5±0.2

SpecNo.JELF243A-0108D-01 P3/8

MURATA MFG.CO., LTD

Reference Only

No. Item Specification Test Method

7.3 Vibration Chip coil shall not be damaged. Oscillation Frequency: 10~2000~10Hz for 20minutes

Total Amplitude: 1.5mm or acceleration amplitude

98mm/s2 (The lesser of two values)

Testing Time: A period of 2 hours in each of 3 mutually

perpendicular directions.

(Total 6 hours)

7.4 Solderability The wetting area of the electrode

shall be at least 90% covered with

new solder coating.

Flux: Ethanol solution of rosin,25(wt)%

(Immersed for 5s to 10s)

Solder: Sn-3.0Ag-0.5Cu

Pre-Heating: 150±10°C / 60 to 90seconds

Solder Temperature: 240±5°C

Immersion Time: 3±1 s

7.5 Resistance

to Soldering Heat

Appearance:No damage

Inductance Change: within ±10%

Flux: Ethanol solution of rosin,25(wt)%

(Immersed for 5s to 10s)

Solder: Sn-3.0Ag-0.5Cu

Pre-Heating: 150±10°C / 60 to 90seconds

Solder Temperature: 270±5°C

Immersion Time: 10±1 s

Then measured after exposure in the room condition

for 24±2 hours.

8.Environmental Performance (It shall be soldered on the substrate.)

No. Item Specification Test Method

8.1 Heat Resistance Appearance:No damage

Inductance Change: within ± 10%

DC Resistance Change:

within ± 10%

Temperature: 105±2°C

Time: 1000h (+48h , -0h)

Then measured after exposure in the room condition

for 24±2 hours.

8.2 Cold Resistance Temperature: -40±2°C

Time: 1000h (+48h , -0h)

Then measured after exposure in the room condition

for 24±2 hours.

8.3 Humidity

Temperature: 85±2°C

Humidity: 80～85%(RH)

Time: 1000h (+48h , -0h)

Then measured after exposure in the room condition

for 24±2 hours.

8.4 Temperature Cycle 1 cycle:

1 step: -40±2°C / 30±3 minutes

2 step: Ordinary temp. / 10 to15 minutes

3 step: +105±2°C / 30±3 min

4 step: Ordinary temp. / 10 to 15 minutes

Total of 100 cycles

Then measured after exposure in the room condition

for 24±2 hours.

9. Specification of Packaging

9.1 Appearance and Dimensions of plastic tape

(in mm)

Dimension of the Cavity is measured

at the bottom side.

5.3±0.1

2.0±0.05 4.0±0.1

Direction of feed

2.4±0.1

*Lead-in/out wire

φ1.5

+0.1

-0

(0.3)

8.0±0.1

5.3±0.1

12.0±0.2

5.5±0.05

1.75±0.1

P1-P3 P4-P6 P7-P8

LQH5BPB1R5NT0L

Mfr. #:

Buy LQH5BPB1R5NT0L

Manufacturer:

Description:

Fixed Inductors 2020 1.5uH 30%

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

LQH5BPB1R5NT0L

LQH5BPB1R5NT0L

Products related to this Datasheet