This transparent metal-in static shielding bag is designed to provide a static
safe environment for ESD sensitive electronic devices. A stronger polyester
layer helps prevent punctures. Bags are printed with an ESD protective symbol
and a lot code for traceability. The bags are heat sealable. ZipTop and other
custom features are available.
SCS Static Shielding Bags 1300 are manufactured from a polyester, metal,
polyethylene laminate. The polyester dielectric in concert with the metal
layer provides shielding of Electrostatic Discharge (ESD) and minimizes the
penetration of electrostatic and electric elds.
DRAWING
NUMBER
1300 Series
DATE
July
2016
© 2016 DESCO INDUSTRIES INC.
Employee Owned
1300 SERIES STATIC SHIELDING BAG
926 JR Industrial Drive, Sanford, NC 27332
WEB SITE: StaticControl.com
PHONE (919) 718-0000
Static Shielding Bag 1300 Series
Specifications and procedures subject to change without notice.
Bag is free of amines, silicones and heavy metals.
This product is intended for commercial use only. This product is not on the Qualied Product
Listing under the Defense Standardization Program.
RoHS 2, REACH, and Conflict Minerals Statement
None of the RoHS 2 restricted materials or REACH substances of very high concern as
of 2015/12/17, or Conflict Minerals are intentionally added in manufacturing this product.
Ref: European Union Directive 2011/65/EU and Regulation (EC) No. 1907/2006/CE.
See SCS Warranty, Limitation of Liability and Remedies
Open Top Bag ZipTop Bag
Tolerance (inches): Width -0, +0.250 Length +/- 0.125 Oset O to 0.250
Seal width +/- 0.125
Meets ANSI/ESD S20.20 Packaging Standard, ANSI/ESD S541, and
Static Control Bag ANSI/ESD S11.4 Level 3
Made in the United States of America with Globally Sourced Materials.
Tolerance: Width -0, +1/4"
Length +/- 1/8" Oset 0 to 1/4"
Seal width 3/8" with a tolerance of +/- 1/8"
Note: Standard bag markings shown
above are not to scale.
Physical Typical Value Testing Method
Tensile Strength
8100 PSI, 55 MPa
ASTM D882
Puncture Resistance
22 lbs, 98 N
MIL-STD-3010C Method 2065
Seal Strength
15 lbs, 66 N
ASTM D882
Thickness
3.2 mils, 0.0813 mm +/-10%
MIL-STD-3010C Method 1003
Marking Adhesion
Pass
IPC-TM-650 2.4.1
Transparency 40% Tobias
Electrical Typical Value Testing Method
Discharge Shielding <20 nJ ANSI/ESD STM11.31
Surface Resistance -
Interior
1 x 10
4
to < 1 x 10
11
ohms
ANSI/ESD STM11.11
Surface Resistance -
Exterior
1 x 10
4
to < 1 x 10
11
ohms
ANSI/ESD STM11.11
Cleanliness Typical Value Testing Method
Silicone
Not Detected
FTIR
Heat Sealing Conditions Typical Value
Temperature 375°F, 190°C
Time
0.5 – 3.5 seconds
Pressure
30 – 70 PSI, 206 - 482 KPa
