CY7C64225
USB-to-UART Bridge Controller
Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600
Document Number: 001-76294 Rev. *F Revised October 7, 2015
USB-to-UART Bridge Controller
Features
Universal Serial Bus (USB) Integration
Full-Speed USB peripheral compliant with USB2.0
specification
USB-IF certified with TID 40001425
Support for bus-powered and self-powered configurations
3 endpoints (1 Interrupt IN, 1 Bulk OUT and 1 Bulk IN)
Integrated USB transceiver, 1.5 k pull-up resistor on D+ line
Universal Asynchronous Receiver Transmitter (UART)
Baud rate generation (300 to 230400)
Data format:
8 data bits
1 stop bit
No parity, even parity or odd parity
Support for Parity, Overrun and Framing errors
Supports flow control using CTS,RTS,DTR, DSR
LED signals to indicate activity on TxD and RxD lines
Full device operation from a single voltage supply of 3.3 V or 5 V
Low power consumption in suspend mode
225 µA at 5 V operating voltage
207 µA at 3.3 V operating voltage
Integrated 24 MHz oscillator
Integrated 3.3 V regulator
Integrated flash to store device configuration
Software support for ease of development
Configuration utility to program device parameters such as
VID, PID and string descriptors.
Certified Cypress VCP driver for Windows (8 / 7 / Vista / XP)
Support for device drivers for Android, Mac, Linux, Window
CE 4.2, 5.0, 6.0
28-pin SSOP 10 mm × 7.5 mm, RoHS compliant package
Temperature grade
Commercial operating temperature range of 0 °C to +70 °C
Figure 1. CY7C64225 Block Diagram
USB
Transceiver
Voltage
Regulator
24MHz
Oscillator
Serial Interface
Engine
(SIE)
PLL
Tx Buffer
Rx Buffer
FLASH
Baud Rate
Generator
UART
Controller
TxD
RxD
CTS
RTS
DTR
DSR
Tx_LED
Rx_LED
VDD
VBUS
D+
D-
GND
VCFG Reset WAKE Suspend
CY7C64225
Document Number: 001-76294 Rev. *F Page 2 of 21
More Information
Cypress provides a wealth of data at www.cypress.com to help you to select the right device for your design, and to help you to quickly
and effectively integrate the device into your design. For a comprehensive list of resources, see the document USB-Serial Bridge
Controller Product Overview.
Overview: USB Portfolio, USB Roadmap
USB 2.0 Product Selectors: USB-Serial Bridge Controller, USB
to UART Controller (Gen I), enCoRe II, enCoRe III, enCoRe V
Knowledge Base Articles: Cypress offers a large number of
USB knowledge base articles covering a broad range of topics,
from basic to advanced level. Recommended knowledge base
articles for getting started with USB to UART Controller (Gen
I) are:
KBA85920 – USB-UART and USB-Serial
KBA85909 – Key Features of the Cypress
®
USB-Serial
Bridge Controller
KBA85921 – Replacing FT232R with CY7C65213
USB-UART LP Bridge Controller
KBA85913 – Voltage supply range for USB-Serial
KBA89355 – USB Serial Cypress Default VID and PID
KBA92641 – USB-Serial Bridge Controller Managing I/Os
using API
KBA92442 – Non-Standard Baud Rates in USB-Serial Bridge
Controllers
KBA91366 – Binding a USB-Serial Device to a Microsoft
®
CDC Driver
KBA92551 – Testing a USB-Serial Bridge Controller
Configured as USB-UART with Linux
®
For a complete list of knowledge base articles, click here.
Code Examples: USB Full-Speed
Development Kits:
CYUSBS232, Cypress USB-UART LP Reference Design Kit
CYUSBS234, Cypress USB-Serial (Single Channel)
Development Kit
CYUSBS236, Cypress USB-Serial (Dual Channel)
Development Kit
Models: IBIS
Cypress USB-UART LP Reference Design Kit
The Cypress USB-UART LP Reference Design Kit is a complete
development resource. It provides a platform to develop and test
custom projects. The development kit contains collateral
materials for the firmware, hardware, and software aspects of a
design.
CY7C64225
Document Number: 001-76294 Rev. *F Page 3 of 21
Contents
Applications ......................................................................4
Functional Description .....................................................4
Introduction .................................................................. 4
Functional Overview ........................................................4
USB Interface ..............................................................4
UART Controller ..........................................................4
Suspend and Resume ................................................. 4
WAKE .......................................................................... 4
Reset ...........................................................................4
Activity Indicators ........................................................ 4
VCFG .......................................................................... 4
VBUS ...........................................................................4
Regulator .....................................................................4
Oscillator .....................................................................4
Flash ............................................................................5
Configurations ..................................................................5
Software and Driver Support ...........................................5
Pin Configuration .............................................................6
28-pin part pinout Description ..................................... 6
Application Circuits ..........................................................7
Bus Powered Design ................................................... 7
Bus Powered Design using External Regulator .......... 8
Self Powered Design ...................................................9
Application Diagram .......................................................10
USB to RS-232 Converter ......................................... 10
USB to UART cable with TTL level UART signals .... 11
Interfacing CY7C64225
with Bus Powered Microcontroller .................................... 12
Interfacing CY7C64225
with Self Powered Microcontroller .................................... 13
Absolute Maximum Ratings ..........................................14
Operating Temperature ..................................................14
DC Electrical Characteristics ........................................15
DC GPIO Specifications ............................................ 15
DC Full-Speed USB Specifications ........................... 15
Ordering Information ......................................................16
Ordering Code Definitions ......................................... 16
Packaging Information ...................................................17
Package Diagrams .................................................... 17
Thermal Impedance .................................................. 17
Solder Reflow Peak Temperature ............................. 17
Acronyms ........................................................................18
Reference Documents ....................................................18
Document Conventions .................................................18
Units of Measure ....................................................... 18
Glossary ..........................................................................18
Document History Page .................................................19
Sales, Solutions, and Legal Information ......................21
Worldwide Sales and Design Support ....................... 21
Products .................................................................... 21
PSoC® Solutions ...................................................... 21
Cypress Developer Community ................................. 21
Technical Support ..................................................... 21

CY7C64225-28PVXCT

Mfr. #:
Manufacturer:
Cypress Semiconductor
Description:
USB Interface IC 5.25 V, USB to UART Controller
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet