4
03-2015, Rev. 0315
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
Potter & Brumfield
General Purpose
Panel/Plug-in Relays
KUMP Series Panel Plug-in Relay (Continued)
Product Code Arrangement Material Coil Terminals Mounting Part Number
KUMP-11A18-24 2 form C; 2 CO AgCdO 24 VAC 4.75mm (.187in) QC Socket mount, plain case 6-1393116-3
KUMP-11A18-120 120 VAC 6-1393116-2
KUMP-11A18-240 240 VAC 6-1393116-4
KUMP-11D18-12 12 VDC 7-1393116-1
KUMP-11D18-24 24 VDC 7-1393116-2
KUMP-11D18-110 110 VDC 7-1393116-0
KUMP-14A18-24 3 form C, 3 CO 24 VAC 8-1393116-5
KUMP-14A18-120 120 VAC 8-1393116-4
KUMP-14D18-12 12 VDC 9-1393116-0
KUMP-14D18-24 24 VDC 9-1393116-1
Product code structure Typical product code KUMP -11 A 1 8 -120
Type
KUM 15A open style relay
KUMP 15A enclosed relay
Contact arrangement
1 1 form A (1 NO) 2 1 form B (1 NC) 3 1 form X (1 NO-DM)
4 1 form Y (1 NC-DB) 5 1 form C (1 CO) 6 1 form Z (1 CO-DB-DM)
7 2 form A (2 NO) 8 2 form B (2 NC) 11 2 form C (2 CO)
12 3 form A (3 NO) 13 3 form B (3 NC) 14 3 form C (3 CO)
Coil Input
A AC, 50/60Hz D DC
Mounting and options
KUM
1 #6-32 mounting stud, 5.54mm (.218in) locating tab 2 2-hole bracket, #6-32 tapped
3 #6-32 tapped core, 3.18mm (.125in) locating tab 4 #6-32 tapped core, 5.54mm (.218in) locating tab
5 #6-32 tapped core, no locating tab
KUMP
1 Socket mount (plain) case
2 Socket mount (plain) case with push-to-test button
3 Socket mount (plain) case with indicator lamp
1)
4 Socket mount (plain) case with indicator lamp and push-to-test button
1)
5 Bracket mount case
6 Bracket mount case with push-to-test button
7 Bracket mount case with indicator lamp
1)
8 Bracket mount case with indicator lamp and push-to-test button
1)
9 Plain case with #6-32 stud and locating tab on end of case
A Plain case with #6-32 stud and locating tab
B Plain case with #6-32 stud and locating tab, push-to-test button
C Plain case with #6-32 stud and locating tab, indicator lamp
1)
D Plain case with #6-32 stud and locating tab, push-to-test button and indicator lamp
1)
E Plain case with #6-32 tapped core and locating tab
F Plain case with #6-32 tapped core and locating tab, push-to-test button
G Plain case with #6-32 tapped core and locating tab, indicator lamp
1)
H Plain case with #6-32 tapped core and locating tab, push-to-test button and indicator lamp
1)
T Top flange case
1) Indicator lamps are available on models with the following coils: 6-24VAC and VDC, 110VDC and 120-240VAC.
Only models with 120-240VAC coils are UL recognized.
Terminal and contact material
6 5.21mm (.205in) quick connect/solder; AgCdO 8 4.75mm (.187in) quick connect/solder; AgCdO
9 1.19mm (.047in) PCB, AgCdO G 6.35mm (.250in) quick connect/solder; AgCdO
2)
R 5.21mm (.205in) quick connect/solder; AgSnOInO T 4.75mm (.187in) quick connect/solder; AgSnOInO
U 1.19mm (.047in) PCB, AgSnOInO V 6.35mm (.250in) quick connect/solder; AgSnOInO
2)
2) 6.35mm (.250in) quick connect/solder terminals are not available on 3 pole relays
Coil voltage
Coil code: please refer to coil versions table
