NCP583
www.onsemi.com
8
APPLICATION INFORMATION
Input Decoupling
A 1.0 mF ceramic capacitor is the recommended value to
be connected between V
in
and GND. For PCB layout
considerations, the traces of V
in
and GND should be
sufficiently wide in order to minimize noise and prevent
unstable operation.
Output Decoupling
It is recommended to use a 0.1 mF ceramic capacitor on
the V
out
pin. For better performance, select a capacitor with
low Equivalent Series Resistance (ESR). For PCB layout
considerations, place the output capacitor close to the
output pin and keep the leads short as possible.
ORDERING INFORMATION
Device
Output Type / Features
Nominal
Output Voltage
Marking Package Shipping†
NCP583SQ15T1G Active High w/Enable 1.5 A5 SC−82AB
(Pb−Free)
3000 / Tape & Reel
NCP583SQ18T1G Active High w/Enable 1.8 A8 SC−82AB
(Pb−Free)
3000 / Tape & Reel
NCP583SQ25T1G Active High w/Enable 2.5 B5 SC−82AB
(Pb−Free)
3000 / Tape & Reel
NCP583SQ27T1G Active High w/Enable 2.7 B7 SC−82AB
(Pb−Free)
3000 / Tape & Reel
NCP583SQ28T1G Active High w/Enable 2.8 B8 SC−82AB
(Pb−Free)
3000 / Tape & Reel
NCP583SQ30T1G Active High w/Enable 3.0 C0 SC−82AB
(Pb−Free)
3000 / Tape & Reel
NCP583SQ33T1G Active High w/Enable 3.3 C3 SC−82AB
(Pb−Free)
3000 / Tape & Reel
NCP583XV15T2G Active High w/Enable 1.5 G15B SOT−563
(Pb−Free)
4000 / Tape & Reel
NCP583XV18T2G Active High w/Enable 1.8 G18B SOT−563
(Pb−Free)
4000 / Tape & Reel
NCP583XV25T2G Active High w/Enable 2.5 G25B SOT−563
(Pb−Free)
4000 / Tape & Reel
NCP583XV26T2G Active High w/Enable 2.6 G26B SOT−563
(Pb−Free)
4000 / Tape & Reel
NCP583XV28T2G Active High w/Enable 2.8 G28B SOT−563
(Pb−Free)
4000 / Tape & Reel
NCP583XV29T2G Active High w/Enable 2.9 G29B SOT−563
(Pb−Free)
4000 / Tape & Reel
NCP583XV30T2G Active High w/Enable 3.0 G30B SOT−563
(Pb−Free)
4000 / Tape & Reel
NCP583XV31T2G Active High w/Enable 3.1 G31B SOT−563
(Pb−Free)
4000 / Tape & Reel
NCP583XV33T2G Active High w/Enable 3.3 G33B SOT−563
(Pb−Free)
4000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
Other voltages are available. Consult your ON Semiconductor representative.