To request the full datasheet, please visit www.intersil.com/products/TW8807
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas Inc. 2011. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
NOT RECOMMENDED FOR NEW DESIGNS
RECOMMENDED REPLACEMENT PART
TW8833 (Not Pin Compatible)
LCD Flat Panel Controller with Built-in
NTSC/PAL/SECAM Decoder and Analog T-CON
TW8807
Introduction
Applications
LCD TVs for home and mobile use
Rear seat entertainment
Portable DVD, PMP and HMD (Head Mount Display)
Features
The TW8807 is a low cost high quality TFT panel
controller with embedded NTSC/PAL/SECAM TV decoder.
It incorporates all the features required to create multi-
purpose LCD TV systems in a single package. It contains
all the circuits required to adapt standard
NTSC/PAL/SECAM analog TV input signals for display on
various TFT LCD panel types. An integrated timing
controller and three DACs allows direct interface with
analog LCD panels. Its versatile 5 analog inputs allow
CVBS, S-video signal to be connected simultaneously.
Other features include: high quality adaptive 4H Comb
Filter, downscaling to QVGA output resolution, 2D de-
interlacer and panoramic scaler, and multi-window
programmable OSD. It also includes image enhancement
functions, such as black and white stretch, 2D peaking,
CTI, and favorite color enhancement to further improve
picture quality. To support analog panel, it also includes
cost saving features like charge pump booster and
programmable panel offset control.
Analog Video Decoder
NTSC (M, 4.43) and PAL (B, D, G, H, I, M, N, N
combination), PAL (60), SECAM with automatic format
detection
Advanced synchronization processing for VCR trick play
signal
Two 10-bit ADCs and analog clamping circuit
Built-in analog anti-aliasing filter
Fully programmable static gain or automatic gain
control for the Y or CVBS channel
Programmable white peak control for the Y or CVBS
channel
Software selectable analog inputs allows any of the
following combinations:
Up to 4 composite video
UP to 1 S-Video
4-H adaptive comb filter Y/C separation
PAL delay line for color phase error correction
Digital PLL for both color and horizontal locking
Programmable hue, brightness, saturation, contrast,
sharpness, Gamma control, and noise suppression
Automatic color control and color killer
Detection of level of copy protection according to
Macrovision standard
TFT PANEL SUPPORT
Supports a wide variety of Analog active matrix TFT
panels
Supports delta RGB 8 bits digital pixel format
ON SCREEN DISPLAY
Built-in OSD controller with integrated character ROM
and programmable RAM font
Multi-window OSD support with color palette
Supports OSD overlay with alpha blending
IMAGE CONTROL
Programmable hue, brightness, saturation, contrast
Sharpness control with vertical peaking
Programmable color transient improvement control
Built-in de-interlacing engine
NTSC / PAL / SECAM
Tuner
VGA out