3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Mini D Ribbon (MDR) Cable Assembly
.050″ High Speed Video Data Transmission System, 50 Position 14X50-SZWB-XXX-0NC
Physical
Electrical
Environmental
*RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values
in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or prolybromianted diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing,
this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.
Channel Link is a trademark of National Semiconductor.
Connector Contact Plating
Wiping Area:
30μ″ [ 0.76μm ] Min. Gold
Shell
Color:
Beige
Material:
Acrylonitrile Butadiene Styrene (ABS)
Cable
Color:
Beige
Jacket Material:
Polyvinyl Chloride (PVC)
Flammability:
AWM VW-1
Voltage Rating:
30 V
Current Rating:
1 A
Insulation Resistance:
> 1 × 10
8
Ω at @100 Vdc
Withstanding Voltage:
350 Vrms for 1 minute
Individually Shielded Twisted Pairs
Characteristic Impedance:
100 ± 10
Ω
Conductor Size:
28 AWG Stranded
Propogation Velocity:
1.25 ns/ft [4.1 ns/m ]
Temperature Rating:
-20°C to +75°C
TS-2103-03
Sheet 1 of 4
• Supports LVDS Channel Link™ signaling
• 20 shielded pairs (100 ohm) +4 drains for
high bandwidth applications
• High density 50 position MDR with rugged
ribbon type contact
• 3 Unshielded Twisted 28 AWG Pairs
• EMI shielded junction shell in either plastic
or over-molded construction
• Rugged thumbscrew retention
• RoHS* compliant
Date Modified: May 12, 2006
UL File No.: E86982
