Intensity Bin Limits (mcd)
AlGaAs Red HDSP-F15x/F16x
IV Bin Category Min. Max.
L 8.67 15.90
M 13.00 23.80
N 19.50 35.80
O 29.30 53.60
P 43.90 80.50
HER/Orange HDSP-F20x/F40x
IV Bin Category Min. Max.
C 0.485 0.890
D 0.728 1.333
E 1.091 2.000
F 1.636 3.000
G 2.454 4.500
H 3.682 6.751
Yellow HDSP-F30x
IV Bin Category Min. Max.
C 0.297 0.543
D 0.445 0.817
E 0.669 1.225
F 1.003 1.838
G 1.504 2.758
H 2.256 4.137
Green HDSP-F50x
IV Bin Category Min. Max.
H 1.54 2.82
I 2.31 4.23
J 3.46 6.34
K 5.18 9.50
L 7.78 14.26
Color Categories
Color Bin
Dominant Wavelength (nm)
Min. Max.
Yellow 1 581.50 585.00
3 584.00 587.50
2 586.50 590.00
4 589.00 592.50
Green 2 573.00 577.00
3 570.00 574.00
4 567.00 571.00
5 564.00 568.00
Note:
All categories are established for classi cation of products. Products
may not be available in all categories. Please contact your local Avago
representatives for further clari cation/information.
Contrast Enhancement
For information on contrast enhancement, please see
Application Note 1015.
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago Technologies and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2015-2016 Avago Technologies. All rights reserved. Obsoletes 5989-2346EN
AV02-2556EN
- January 8, 2016
Soldering/Cleaning
Cleaning agents from the ketone family (acetone, methyl
ethyl ketone, etc.) and from the chlorinated hydrocarbon
family (methylene chloride, trichloro- ethylene, carbon
tetrachloride, etc.) are not recommended for cleaning
LED parts. All of these various solvents attack or dissolve
the encapsulating epoxies used to form the package of
plastic LED parts.
For further information on soldering LEDs, please refer to
Application Note 1027.