INTERCONNECTS
Mill-Max Mfg. Corp. • 190 Pine Hollow Road, P.O. Box 300, Oyster Bay, NY 11771 • 516-922-6000 • Fax: 516-922-9253 • www.mill-max.com
PAGE 51 | INTERCONNECTS
SERIES 310, 350, 410, 450 • .100” GRID (.018” DIA. PINS),
SMT GULL WING HEADERS & SOCKETS • SINGLE AND DOUBLE ROW STRIPS
FIG. 1
Left Hand
Footprint
Right Hand
Footprint
.100
.110
.100
.142
.189
.175
P.C.B.
.018 DIA.
.085
.200
.045
.180
FIG. 2
Footprint
.200
.100
.142
.189
.265
.100
.110
P.C.B.
.018
DIA.
.280
.100
.090
.045
FIG. 3
Left Hand
Footprint
Right Hand
Footprint
.100
.200
.110
.220
.100
.183
.095
.146
.200
.045
P.C.B.
.095
FIG. 4
Footprint
.100
.200
.095
.110
.288
.100
.220
.146
.300
.100
.100
P.C.B.
.045
• Headers (350 & 450) use MM #3404 pins. See
page 212 for details
• Sockets (310 & 410) use MM #1005 receptacles
and accept pin diameters from .015”-.025”.
See page 166 for details
• Contact is rated at 3 amps
• Coplanarity .005” (single row max. 10 pins;
double row max. 20 pins). For higher pin
counts, contact Technical Support
• Insulators are high temperature thermoplastic,
suitable for all soldering operations
ORDERING INFORMATION
Single Row Header, Left Hand Footprint, Odd or Even # of pins
350XX1_ _00106000
FIG. 1L
Specify number of pins 02-64
SPECIFY PLATING CODE XX=
Pin Plating
Contact (Clip)
SPECIFY PLATING CODE XX=
Sleeve (Pin)
10 ” Au
90
200 ” Sn/Pb 200 ” Sn
10 ” Au
200 ” Sn/Pb
91
30 ” Au
200 ” Sn/Pb
93
10 ” Au
200 ” Sn
30 ” Au
200 ” Sn
Double Row Socket, Even # of pins
410XX2_ _41105000
XX=Plating Code
See Below
For
Electrical, Mechanical
& Enviromental Data,
See page 264
RoHS - 2
2011/65/EU
Single Row Header, Right Hand Footprint, Even # of pins
350XX1_ _00107000
FIG. 1R
Specify number of pins 02-64
Double Row Header, Even # of pins
450XX2_ _00106000
Single Row Socket, Left Hand Footprint, Odd or Even # of pins
310XX1_ _41105000
FIG. 3L
Specify number of pins 02-64
Single Row Socket, Right Hand Footprint, Even # of pins
310XX1_ _41107000
Coplanarity .005”. For pin counts >20 positions, consult
Technical Support.
Coplanarity .005”. For pin counts >10 positions, consult
Technical Support.
Coplanarity .005”. For pin counts >20 positions, consult
Technical Support.
Coplanarity .005”. For pin counts >10 positions, consult
Technical Support.
FIG. 2
Specify number of pins 04-72
FIG. 3R
Specify number of pins 02-64
Specify number of pins 04-72
FIG. 4
10
43
41
40