https://www.phoenixcontact.com/us/produkte/1400770
08.08.2012Page2/7
Sensor/Actuator cable-SAC-3P-M12MS/1,5-PUR/A-1L-
Z-1400770
Technical data
General characteristics
Torque 0.6 Nm (Valve plug-in connector)
Contact material CuSn
Contact surface material Ni/Au
Contact carrier material TPU GF
Material of grip body TPU
Contact material CuSn
Contact surface material Sn
Valve plug contact insert material PA 66
Material housing valve plug TPU
Material, knurls Zinc die-cast, nickel-plated
Sealing material TPU (Seal molded)
Status display 1 LED
Protective circuit/component Z diode
Conductor data
Cable type PUR halogen-free black
Cable type (abbreviation) PUR
Cable abbreviation Li9Y11Y-HF
UL AWM Style 20549
Conductor cross section 3x 0.5 mm²
AWG signal line 20
Conductor structure signal line 28x 0.15 mm
Core diameter including insulation 1.5 mm ±0.05 mm (signal line)
External cable diameter 4.5 mm ± 0.2 mm
Wire colors Black 1, black 2, green/yellow
External sheath, color Black-gray RAL 7021
Insulation resistance min. 20 MΩ*km
Conductor resistance 39 Ω/km (at 20 °C)
Nominal voltage, conductor ≤ 300 V
Test voltage, conductor ≥ 1200 V
Overall twist 3 wires, twisted
Outer sheath, material PUR
Material conductor insulation PP
Conductor material Bare Cu litz wires
Smallest bending radius, fixed installation 22.5 mm
Number of bending cycles 15000000
Bending radius 50 mm
Traversing path 0.9 m
Traversing rate 5 m/s
Acceleration 30 m/s²
Ambient temperature (operation) -40 °C ... 80 °C (cable, fixed installation)
Ambient temperature (operation) -20 °C ... 80 °C (cable, flexible installation)