Electrical characteristics3.2
Table 4: Electrical characteristics @ Vdd =3 V, T=25 °C unless otherwise noted
UnitMax.Typ.
(1)
Min.Test conditionParameterSymbol
V3.632.7Supply voltageVdd
mA4.2Supply currentIdd
mA2.2Supply current sleep
mode
IddSl
µA5Supply current in
power-down mode
IddPdn
V0.2*Vdd0Logic 0 levelSelf-test inputVst
Vdd0.8*VddLogic 1 level
V0.2*Vdd0Logic 0 levelPower-down inputVpd
Vdd0.8*VddLogic 1 level
°C+85-40Operating temperature
range
Top
(1)
Typical specifications are not guaranteed
Note:
The product is factory calibrated at 3 V.
Absolute maximum ratings3.3
Stresses above those listed as "Absolute maximum ratings" may cause permanent damage
to the device. This is a stress rating only and functional operation of the device under these
conditions is not implied. Exposure to maximum rating conditions for extended periods may
affect device reliability.
Table 5: Absolute maximum ratings
UnitMaximum valueRatingsSymbol
V-0.3 to 6Supply voltageVdd
V-0.3 to Vdd +0.3Input voltage on any control pin (Sleep/PD,
ST)
Vin
g3000 for 0.5 msAccelerationA
g10000 for 0.1 ms
DocID16568 Rev 28/16
LY330ALHMechanical and electrical characteristics
