SPEC NO: DSAN2013 REV NO: V.4B DATE: MAY/06/2015 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.T.Liu ERP: 1203013773
Selection Guide
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
Iv (mcd) [2]
@ 5mA
iewing
Angle [1]
Min. Typ. 2θ1/2
APGA1602QBC/KA-5MAV Blue (InGaN) Water Clear 8 20
130
°(H)
150
°(V)
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Blue 460
nm I
F=5mA
λD [1] Dominant Wavelength Blue 463
nm I
F=5mA
Δλ1/2 Spectral Line Half-width Blue 25
nm I
F=5mA
V
F [2] Forward Voltage Blue 2.8 3.2 V IF=5mA
I
R Reverse Current Blue
50 uA VR=5V
Parameter Blue Units
Power dissipation 70 mW
DC Forward Current 20 mA
Peak Forward Current [1] 100 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +100°C
Electrostatic Discharge Threshold(HBM) 250 V
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
3.Wavelength value is traceable to the CIE127-2007 compliant national standards.
4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
