Type 725M Orange Drop
®
Metallized Polypropylene
Film Capacitors
Features
• Radial-lead
• Pressed profile, compact size
• Non-inductively wound
• Very low ESR/ESL
• Self-healing properties
Specifications
Capacitance Range:
.01 to 4.7µF
Capacitance Tolerance:
±5%, ±10%
(other tolerances available upon request)
Voltage Ratings:
160 to 630 Volts D-C
100 to 250 Volts A-C
Operating Temperature Range:
-55°C to +85°C (at full voltage)
Voltage Derating:
At +105°C, 50% of +85°C rating.
Dissipation Factor:
0.1% Maximum @ 1 KHz, +25°C
(contact us for additional details on specific
capacitance and voltage ratings.)
Corona Start Voltage (typical):
160 VDC units: 250 Volts RMS
250 VDC units: 275 Volts RMS
400 VDC units: 300 Volts RMS
630 VDC units: 325 Volts RMS
Insulation Resistance:
At +25°C: 200,000 M for C 0.5 µF
100,000 M-µF for C > 0.5 µF
At +85°C: 10,000 M for C 0.5 µF
5,000 M-µF for C > 0.5 µF
Pulse Rise Time (dV/dt):
See standard ratings table. dV/dt
rating is in Volts/µsec.
Encapsulation:
Conformal coating of orange, flame
retardant epoxy. Meets UL94V-0
specifications.
Lead Wire:
Tinned copper-clad steel,
.032 (0.8) diameter, #20 AWG.
Dielectric/Construction:
Metallized Polypropylene film, single
section design. Non-inductively wound.
Dimensions in inches, metric (mm) in parenthesis.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 725M, Orange Drop®, Metallized Polypropylene Film Capacitors