USA/Canada:
Toll Free:
Europe
:
(315) 432-8909
(800) 544-2414
+44 2392-232392
RoHS Compliant
• 100 Watts
• DC – 4.0 GHz
• AlN Ceramic
• Non-Nichrome Resistive
Element
• Low VSWR
•
100% Tested
Half Flange Termination
100 Watts, 50
Ω
ΩΩ
Ω
The J100N50X4B is high performance Aluminum Nitride (AlN) half flange
termination intended as a cost competitive alternative to Beryllium Oxide
(BeO). The termination is well suited to all cellular frequency bands such
as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling
makes the part ideal for terminating circulators, and for use in power
combiners. The termination is also RoHS compliant!
Resistive Element
Thick Film
Substrate
AlN Ceramic
Mounting Flange
Copper, nickel plated per QC-N-290
Operating Temperature
-55°C to +150°C (see de rating chart)
Tolerance is
0.010”, unless otherwise specified. Designed to meet or exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value:
50 Ohms, ± 2%
Power:
100 Watts
Frequency Range:
DC – 4.0 GHz
Return Loss
> 26 dB to 1.3 GHz
> 22 dB to 4.0GHz
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES
LEAD LENGTH: 0.150” MIN
1 of 2
