For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
SWITCHES - SPDT - SMT
6
HMC284AMS8G / HMC284AMS8GE
v00.0612
SPDT NON-REFLECTIVE SWITCH
DC - 3.5 GHz
Evaluation PCB
The circuit board used in the application should be
generated with proper RF circuit design techniques.
Signal lines at the RF port should have 50 Ohm
impedance and the package ground leads and
package bottom should be connected directly to the
ground plane similar to that shown above. The eval-
uation circuit board shown above is available from
Hittite Microwave Corporation upon request.
List of Materials for Evaluation PCB 105143
[1]
Item Description
J1 - J3 PCB Mount SMA RF Connector
J4 - J6
DC Pin
C1 - C3 100 pF capacitor, 0402 Pkg.
R1, R2
100 Ohm resistor, 0402 Pkg.
U1
HMC284AMS8G / HMC284AMS8GE
SPDT Switch
PCB
[2]
107821 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
