OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

NGA10S15050SC

P1-P3P4-P6
Technical enquiries email: mk@murata-ps.com, tel: +44 (0)1908 615232
NGA Series
Non-Isolated Wide Input DC/DC Converters
2013-01-24 KDC_NGAC.F03 Page 4 of 6
www.murata-ps.com
MEAN TIME TO FAILURE (MTTF)
1
Part number 25ºC Units
NGA10S15018 1464
KHrs
NGA10S15025 1463
NGA10S15033 1463
NGA10S15050 1461
TERMINOLOGY
Transient Response Over-Shoot/Under-Shoot Start Delay
Time for VOUT to be within 1% of VNOM where:
Max. deviation from final steady state output.
Typical rise time (ms) after control pin high
with valid input.
PACKAGE SPECIFICATIONS
MECHANICAL DIMENSIONS - SIP PACKAGE
RECOMMENDED FOOTPRINT
PIN CONNECTIONS
Pin Function
1* SD
2+V
IN
3 COMMON
4+V
OUT
5* VADJ
Weight: 4.0g
* Optional pins available on NGA10S15050SEC only
1. Calculated using MIL-HDBK-217F with nominal input voltage at full load.
NGA10S15050SEC
XYYWW
0.825 (20.96)
0.846
(21.49)
0.1 (2.54)
0.312
(7.92)
0.878
(22.29)
0.146±0.020
(3.70±0.50)
0
.020±0.002
(0.50±0.05)
0.149
(3.78)
0.220 (5.60)
0.014±0.002
(0.35±0.05)
2 3 4
2
3
4
1*
5*
5* 1*






All dimensions in inches ±0.01 (mm ±0.25mm).
All pins on a 0.1 (2.54) pitch and within ±0.01 (0.25) of true position.
All dimensions in inches ±0.01 (mm ±0.25mm).
All pins on a 0.1 (2.54) pitch and within ±0.01 (0.25) of true position.
VOUT 25% + VOUT 75%
2
VNOM =
Technical enquiries email: mk@murata-ps.com, tel: +44 (0)1908 615232
NGA Series
Non-Isolated Wide Input DC/DC Converters
2013-01-24 KDC_NGAC.F03 Page 5 of 6
www.murata-ps.com
PACKAGE SPECIFICATIONS (continued)
MECHANICAL DIMENSIONS - DIP PACKAGE
RECOMMENDED FOOTPRINT
PIN CONNECTIONS
Pin Function
1* SD
2+VIN
3 COMMON
4+V
OUT
5* VADJ
6NC
7NC
Weight: 4.0g
* Optional pins available on NGA10S15050DEC only
RoHS COMPLIANCE INFORMATION
This series is compatible with RoHS soldering systems with a peak wave solder temperature of 300ºC for 10 seconds. The pin
termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte Tin with Nickel Preplate and Tin on the DIP types.
Both types in this series are backward compatible with Sn/Pb soldering systems.
For further information, please visit www.murata-ps.com/rohs
NGA10S15050DC
XYYWW
0.846 (21.49)
0.874±0.020 (22.19±0.50)
0.100 (2.54)
0.400
(10.16)
0.213 (5.41)
0.825 (20.96)
0.753 (19.14)
0.222±0.020
(5.65±0.50 )
0.267 (6.77) MAX
0.161±0.020
(4.10±0.50)
0.010±0.002
(0.25±0.05)
0.020±0.002 (0.50±0.05)
2
3
4
7
6
1*
5*
4
3
2
6
7
5*
1*








All dimensions in inches ±0.01 (mm ±0.25mm).
All pins on a 0.1 (2.54) pitch and within 0.01 (0.25) of true position.
All dimensions in inches ±0.01 (mm ±0.25mm) except where stated otherwise.
All pins on a 0.1 (2.54) pitch and within 0.01 (0.25) of true position.
Technical enquiries email: mk@murata-ps.com, tel: +44 (0)1908 615232
NGA Series
Non-Isolated Wide Input DC/DC Converters
2013-01-24 KDC_NGAC.F03 Page 6 of 6
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
notice. © 2011 Murata Power Solutions, Inc.
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
www.murata-ps.com/locations
PACKAGE SPECIFICATIONS (continued)
TRAY DIMENSIONS - SIP PACKAGE
TRAY DIMENSIONS - DIP PACKAGE


































Tray quantity: 25
All dimensions in inches ±0.01 (mm ±0.25mm).
Tray quantity: 25
All dimensions in inches ±0.01 (mm ±0.25mm).
P1-P3P4-P6

NGA10S15050SC

Mfr. #:
Buy NGA10S15050SC
Manufacturer:
Description:
DC DC CONVERTER 5V 10W
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet