Input Voltage Range ±10%
Output Voltage Accuracy ±5%
Line Voltage Regulation 1.2%/1% of Vin typ.
Load Voltage Regulation (10% to 100% full load) 10% max. / 4% typ.
Output Ripple and Noise (20MHz limited) 100mVp-p max.
Operating Frequency 20kHz min. / 54kHz typ.
Efficiency at Full Load 70% min. / 85% typ.
Efficiency at 50%l Load 65% min. / 80% typ.
Minimum Load = 0% Specifications valid for 10% minimum load only.
Isolation Voltage (tested for 1 second) 1000VDC
(rated for 1 minute**) 500VAC / 60Hz
Isolation Voltage H-Suffix (tested for 1 second) 2000VDC
H-Suffix (rated for 1 minute**) 1000VAC / 60Hz
Isolation Capacitance 20pF min. / 75pF max.
Isolation Resistance 10 GΩ min.
Short Circuit Protection 1 Second
P-Suffix Continuous
Operating Temperature Range (free air convection) -40°C to +85°C (see Graph)
Storage Temperature Range -55°C to +125°C
Relative Humidity 95% RH
Package Weight 1.4g
Packing Quantity 42 pcs per Tube
MTBF (+25°C) using MIL-HDBK 217F 985 x 10
3
hours
(+85°C) using MIL-HDBK 217F 200 x 10
3
hours
Certifications
EN General Safety Report: SPCLVD1109103 EN 60950-1:2006 + A12:2011
UL General Safety Report: E358085 UL 60950-1, 2nd Edition
ECONOLINE
DC/DC-Converter
with 3 year Warranty
ROL
EN-60950-1 Certified
UL-60950-1 Certified
Selection Guide
Specifications (measured at T
A
= 25°C, nominal input voltage, full load and after warm-up)
Derating-Graph
(Ambient Temperature)
● Industry Standard Pinout
●
1kVDC or 2kVDC Isolation
●
UL94V-0 Package Material
● Optional Continuous Short Circuit Protected
● Fully Encapsulated
● Custom Solutions Available
● Efficiency to 87%
Features
Unregulated
Converter
}
Detailed Information see
Application Notes chapter "MTBF"
Description
The ROL DC/DC converters are typically used in general purpose low power isola-
tion and voltage matching applications, and feature a full industrial operating tem-
perature range of -40°C to +85°C without derating.
Part Input Output Output Efficiency Max.
Number Voltage Voltage Current Capacitive
SIP 4 (2kV) (VDC) (VDC) (mA) (%) Load
(1)
ROL-xx05S (H) 5, 12 5 100 78-82 470µF
ROL-xx12S (H) 5, 12 12 42 80-86 150µF
ROL-xx15S (H) 5, 12 15 33 80-87 150µF
xx = Input Voltage (other input and output voltage combinations available on request)
* add Suffix “P” for Continuous Short Circuit Protection, e.g.
ROL-0505S/P, ROL-0505S/HP
0.5 Watt
SIP4
Single
Output
RoHS
2011/65/EU
6/6
E358085
**Any data referred to in this datasheet are of indicative nature and based on our practical experience only. For further details, please refer
to our Application Notes.
Refer to Application Notes
REV: 0/2015 www.recom-power.comE-6
