OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

WBSACVLXY-1

P1-P3P4-P6P7-P8
31-Mar. 2016 Ver.1.0
TAIYO YUDEN CO., LTD.
7 / 8
WBSACVLXY-1
TAIYO YUDEN CO., LTD.
J5 Debug Interface (not used by TAIYO YUDEN standard application)
Pin#
Name
Direction
Description
1
EX3V3_PWR
-
Power (to monitor power supply voltage)
2
TMS
Input
JTAG TMS signal
3
GND
-
Ground
4
TCK
Input
JTAG TCK signal
5
GND
-
Ground
6
TDO
Output
JTAG TDO signal
7
NC
-
8
TDI
Input
JTAG TDI signal
9
NC
-
10
TRSTN
Input
JTAG target reset signal
Software
Device Drivers for FT232RQ:
FT232RQ USB-UART converter is built in this board. FT232RQ is made by Future Technology
Devices International Limited. Download USB driver from following URL.
http://www.ftdichip.com/
Example of connection for evaluation
Case1. With PC
Put jumper on J1 and J6 and connect USB cable
Connect USB cable between PC and WBSACLVXY-1
Run serial terminal software. Default baud rate of the module is 115.2kbps. Please configure baud rate
of serial terminal software.
WBSACVLXY-1
PC
USB
Mini-B
31-Mar. 2016 Ver.1.0
TAIYO YUDEN CO., LTD.
8 / 8
WBSACVLXY-1
TAIYO YUDEN CO., LTD.
Case2. Using external interface (with other MCU)
Cut the line between the land patterns of Solder Bridge SB1 – SB4 in order to disconnect the UART line
of the module from FT232RQ.
Put jumper on J6 only and supply power source (3.3V) to J2/J3 pin#1.
DO NOT put jumper on J1 in this case. If do that, MCU and WBSACVLXY-1 may be broken.
DC power cable
Red:5V, Blue: GND
USB cable (mini-B)
USB slot
WBSACVLXY-1MCU
UART TXD
UART RXD
UART RTS
UART CTS
UART1_TXD
UART1_RXD
UART1_RTSN
UART1_CTSN
RESETN
WAKEUP0
GPIO
GPIO
VDD EX3V3_PWR
GND GND
3.3V
P1-P3P4-P6P7-P8

WBSACVLXY-1

Mfr. #:
Buy WBSACVLXY-1
Manufacturer:
Taiyo Yuden
Description:
WiFi Development Tools (802.11) Evaluation Board For WYSACVLXY-XX
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet