* "1&.XXXBQFNDPN
4FDVSJUZDBQT
&ORSWITCHSERIES(
With standard bushing
Security caps prevent any inadvertent lever operation.
When the cap is raised, the lever can be operated freely.
When the cap is fully depressed, the lever is reset/locked in a stable position.
They are designed for use on switches with Ø 11,9 (.468) or Ø 12 (.472) threaded
bushing and lever length 17,5 (.688) outside bushing.
Note : For correct switch operation, the security cap should be adjusted properly by
means of 2 nuts.
4FSJFTGPSQPTJUJPOTXJUDIFT
• Lever returned then locked in upper position
4FSJFTGPSQPTJUJPOTXJUDIFT
• Lever returned then locked in down position (OFF)
."5&3*"-4
• Support plate : matt black steel
• Cap : thermoset or thermoplastic
(20PN, 200PN, 300PN)
Model No Colour
Grey
White
Orange
Black
Red
Green
Yellow
Blue
Black/yellow striped
Model No Colour
Grey
White
Orange
Black
Red
Green
Yellow
Blue
Black/yellow striped
.0%&-
4536$563&
(1.929)(.551)
(1.551)
(.669)
(.866)
(.645)
49.00
22.0017.00
14.00
16.40
39.40
39.40
16.40
14.00
17.00 22.00
49.00
(.645)
(.866)
(.669)
(1.551)
(.551) (1.929)
4FSJFT1/GPSQPTJUJPOTXJUDIFT
• Lever returned then locked in down position (OFF)
Model No Colour
1/ Grey
1/ White
1/ Orange
1/ Black
1/ Red
1/ Green
1/ Yellow
1/ Blue
(1.102)
28.00
(.669)
17.00
(1.318)
33.50
(.826)
21.00
(1.732)
44.00
(.551)
14.00
On this model, holes for wiring a seal are standard.