12/15
Photocoupler
4N3X series
Part No. : 4N3X series
BNS-OD-FC002/A4
Rev.: D
6. TEMPERATURE PROFILE OF SOLDERING
6.1 IR Reflow soldering (JEDEC-STD-020C compliant)
One time soldering reflow is recommended within the condition of temperature and time profile shown below. Do not solder more than three times.
Profile item Conditions
Preheat
- Temperature Min (T
Smin
)
- Temperature Max (T
Smax
)
- Time (min to max) (ts)
150˚C
200˚C
90±30 sec
Soldering zone
- Temperature (T
L
)
- Time (t
L
)
217˚C
60 sec
Peak Temperature (T
P
) 260˚C
Ramp-up rate 3˚C / sec max.
Ramp-down rate 3~6˚C / sec
60 ~ 120 sec
25 C
150 C
200 C
260 C
217 C
60 sec
Time (sec)
Temperature ( C)
20 sec
Tsmax
ts (Preheat)
tL (Soldering)
Tsmin
TL
TP
Ramp-down
Ramp-up
35~70 sec
13/15
Photocoupler
4N3X series
Part No. : 4N3X series
BNS-OD-FC002/A4
Rev.: D
6.2 Wave soldering (JEDEC22A111 compliant)
One time soldering is recommended within the condition of temperature.
Temperature: 260+0/-5˚C
Time: 10 sec.
Preheat temperature:25 to 140˚C
Preheat time: 30 to 80 sec.
6.3 Hand soldering by soldering iron
Allow single lead soldering in every single process. One time soldering is recommended.
Temperature: 380+0/-5˚C
Time: 3 sec max.
14/15
Photocoupler
4N3X series
Part No. : 4N3X series
BNS-OD-FC002/A4
Rev.: D
7. RRECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD)
Unit: mm

4N35S

Mfr. #:
Manufacturer:
Lite-On
Description:
Transistor Output Optocouplers PTR 100%, 3.5KV
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet