15/15
Photocoupler
4N3X series
Part No. : 4N3X series
BNS-OD-FC002/A4
Rev.: D
8. Naming rule
Example : 4N35S-TA1
Example : 4N35STA1-V-G
9. Notes:
LiteOn is continually improving the quality, reliability, function or design and Lite
On reserves the right to make changes without
further notices.
The products shown in this publication are designed for the general use in electronic
applications such as office automation
equipment, communications devices, audio/visual equipment, electrical application and instrumentation.
For equipment/devices where high reliability or safety is required, such as space
applications, nuclear power control equipment,
medical equipment, etc, please contact our sales representatives.
When requiring a device for any “specific” application, please contact our sales in advice.
If there are any questions about the contents of this publication, please contact us at your convenience.
The contents described herein are subject to change without prior notice.
Immerge unit’s body in solder paste is not recommended.
4N
3X (1)-(2)
DEVICE PART NUMBER
(1) No suffix = Dual-in-Line package
M = Wide lead spacing package
S = Surface mounting package
(2) TAPING TYPE (TA,TA1 or none)
4N3X series have tape and reel solution.
Please refer to orientation of taping on Page P5
4N
3X(1)( 2)-V
DEVICE PART NUMBER
(1) No suffix = Dual-in-Line package
M = Wide lead spacing package
S = Surface mounting package
(2) TAPING TYPE (TA,TA1 or none)
4N3X series have tape and reel solution.
Please refer to orientation of taping on Page P5
(3) VDE order option
