Evaluation Board User Guide
UG-230
One Technology Way • P. O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Te l: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
ADP198 Evaluation Board User Guide
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 10
FEATURES
Ultrasmall 1 mm × 1 mm, 4-ball, 0.5 mm pitch WLCSP
Tiny 8-lead, 2 mm × 2 mm LFCSP
Low RDS
ON
of 50 mΩ at 3.3 V (WLCSP)
Low input voltage range of 1.65 V to 6.5 V
1 A continuous operating current
Operating temperature range: T
J
= −40°C to +85°C
GENERAL DESCRIPTION
The ADP198 evaluation boards are used to demonstrate the
functionality of the ADP198 power switch.
Simple device measurements such as VIN to VOUT resistance
(RDS
ON
), ground current, and off state current can be demon-
strated with just a single voltage source, a voltmeter, an ammeter,
and load resistors.
Full details about the ADP198 power switch are available in the
ADP198 data sheet, which should be consulted when using the
ADP198 evaluation boards.
EVALUATION BOARDS
09562-001
Figure 1. ADP198 LFCSP Evaluation Board
09562-002
Figure 2. ADP198 WLCSP Evaluation Board
