REC10-4815SRW/H2/A/M/SMD

ECONOLINE
DC/DC-Converter
with 3 year Warranty
REC10
Refer to Application Notes
Selection Guide
10 Watt
DIP24 & SMD
Single & Dual
Output
10W DIP24 Package
2KVDC and 3kVDC Isolation Options
2:1 and 4:1 Versions
Continuous Short Circuit Protection
(power limiting)
Synchronous Rectification on 3.3, 5V outputs
Full SMD internal design
Through Hole or SMD Pinning Options
Remote Control Pin
Efficiency to 87%
Features
Regulated
Converters
Part Input Output Output Efficiency Max. Cap.
Number Voltage Voltage Current Load
(VDC) (VDC) (mA) (%)
REC10-xx3.3SRW/H*/A/M 9-18, 18-36, 36-75 3.3 2000 84-85 2200µF
REC10-xx05SRW/H*/A/M 9-18, 18-36, 36-75 5 2000 86-87 2200µF
REC10-xx12SRW/H*/A/M 9-18, 18-36, 36-75 12 833 85-86 470µF
REC10-xx15SRW/H*/A/M 9-18, 18-36, 36-75 15 667 85-86 220µF
REC10-xx05DRW/H*/A/M 9-18, 18-36, 36-75 ±5 ±1000 84 ±1000µF
REC10-xx12DRW/H*/A/M 9-18, 18-36, 36-75 ±12 ±416 86 ±220µF
REC10-xx15DRW/H*/A/M 9-18, 18-36, 36-75 ±15 ±333 86 ±100µF
REC10-xx3.3SRWZ/H*/A/M 9-36, 18-75 3.3 2000 84 2200µF
REC10-xx05SRWZ/H*/A/M 9-36, 18-75 5 2000 86 2200µF
REC10-xx12SRWZ/H*/A/M 9-36, 18-75 12 833 85 470µF
REC10-xx15SRWZ/H*/A/M 9-36, 18-75 15 667 85 220µF
REC10-xx05DRWZ/H*/A/M 9-36, 18-75 ±5 ±1000 83 ±1000µF
REC10-xx12DRWZ/H*/A/M 9-36, 18-75 ±12 ±416 85 ±220µF
REC10-xx15DRWZ/H*/A/M 9-36, 18-75 ±15 ±333 85 ±100µF
2:1
xx = 9-18Vin = 12,
xx = 18-36Vin = 24,
xx = 36-75Vin = 48
* Standard is /H2 for 2kVDC isolation,
use /H3 for 3kVDC Isolation (not SMD)
* add suffix "/X2" for pinning options, see next page.
* add suffix "/SMD" for SMD package, e.g.
REC10-2405SRW/H2/A/M/SMD
Description
Specifications (measured at T
A
= 25°C, nominal input voltage, full load and after warm-up)
The REC10-xxxxSRW/DRW-series offer single and dual regulated outputs in a DIP24 package
with 2kV or 3kV isolation options and are suitable for higher power industrial or medical
applications. Remote on/off control is standard and SMD pinning is offered with the /SMD option.
The converters can deliver 150% rated power for short periods of time to cope with applications
with large capacitive loads or high start up currents.
Input Voltage Range 2:1 & 4:1
Input Filter PI Network
Output Voltage Accuracy ±1.5% max.
Line Voltage Regulation (V
L
to V
H
at full load) ±0.5% max.
Load Voltage Regulation Single ±0.5% max.
(25% to 100% full load ) Dual ±1.2% max.
Cross Regulation (100%: 25% to 100% full load ) ±5% max.
Output Ripple and Noise (with 100n output capacitor and 20MHz BW) 100mVp-p max.
Start-up time 300ms typ.
Operating Frequency (Full Load) 400kHz typ.
Efficiency at Full Load see Selection Guide
Minimum Load 0%
continued on next page
4:1
xx = 9-36Vin = 24,
xx = 18-75Vin = 48
EN-60950-1 Certified
EN-60601-1 Certified
UL-60950-1 Certified
E224736
RoHS
2011/65/EU
6/6
**Any data referred to in this datasheet are of indicative nature and
based on our practical experience only. For further details, please refer
to our Application Notes.
REV: 0/2015 E-163www.recom-power.com
REC10
Derating-Graph
(Ambient Temperature)
Output Power (%)
100
60
20
40
100
500-40 150
Operating Temperature °C
0
80
Safe Operating Area
81
Specifications (measured at T
A
= 25°C, nominal input voltage, full load and after warm-up)
Input Surge Voltage (100ms max.) 12V Input 36VDC
24V Input 50VDC
48V Input 100VDC
Isolation Voltage H2-Suffix and SMD (tested for 1 second) 2000VDC
(rated for 1 minute**) 1000VAC / 60Hz
H3-Suffix (tested for 1 second) 3000VDC
(rated for 1 minute**) 1500VAC / 60Hz
Isolation Capacitance 1200pF typ.
Isolation Resistance 1 GΩ min.
Overload Protection 150% typ.
Short Circuit Protection Continuous, Auto Restart
Operating Temperature Range 4:1 -40°C to +71°C (see Graph)
(free air convection) 2:1 -40°C to +81°C (see Graph)
Remote On/Off DC/DC ON Open or 3.5V<Vr<12V
DC/DC OFF Short or 0V<Vr<1.2V
Storage Temperature Range -55°C to +105°C
Temperature Coefficient ±0.05% max.
Relative Humidity 95% RH
Case Material Nickel Plated Metal with Non-Conductive Base
Thermal Impedance Natural convection 15°C/W
Maximum Case Temperature 100°C
Vibration 10-55Hz, 2G, 30mins along X,Y & Z
Package Weight 18g
Packing Quantity 15 pcs per Tube
MTBF (+25°C) using MIL-HDBK 217F 1000 x 10
3
hours
(+71°C) using MIL-HDBK 217F >250 x 10
3
hours
Certifications
EN General Safety Report: SPCLVD1211033-2 EN60950-1:2006 + A12:2011
UL General Safety Report: E224736 UL 60950-1 1st Ed.
C22.2 No. 60950-1-03
EN Medical Safety Report: MDD12060585 + RM1206085 IEC/EN 60601-1 3rd Edition
Medical Report + ISO14971 Risk Assessment
REC10-S_DRW(Z)/H*/A/M
Series
ECONOLINE
DC/DC-Converter
Typical Characteristics
Efficiency %
100
0
40%0% 100%
40
Efficiency / Load (Nominal Vin)
60%
80%
20%
20
60
80
Total Output current (%)
1205S
1212S
REC10-1205SRW/H2/A/M (/SMD)
REC10-1212SRW/H2/A/M (/SMD)
9
Efficiency VS Input Voltage
70
72
74
76
78
80
82
84
86
88
90
Efficiency (%)
Input Voltage (V)
1205
1212
18
12
14
1610
Output Power (%)
100
60
20
40
90
50
0-40
71
150
Operating Temperature °C
0
80
Safe Operating Area
4:1
2:1 Converters
4:1 Converters
Detailed Information see
Application Notes chapter "MTBF"
}
Note: Refer to Application Notes for EMC Class B Filter suggestion
REV: 0/2015 www.recom-power.comE-164
REC10
Package Style and Pinning (mm)
24 PIN DIP Package - Available with /H2 and /H3 Options
24 PIN SMD Package- Only available with /H2 Option
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Pin Connections DIP24
Pin # Single Single/X2 Dual
1 CTRL No Pin CTRL
2 –Vin –Vin –Vin
3 –Vin –Vin –Vin
9 NC No Pin Com
11 NC NC –Vout
14 +Vout +Vout +Vout
16 – Vout –Vout Com
22 +Vin +Vin +Vin
23 +Vin +Vin +Vin
NC = No Connection
19.90
9
10
11
12
24
23
22
16
15
14
13
21
20
1
325
4
1
31.40
25.40
10.90
Bottom View
11 x 2.54
Pin area
0.1 x 0.50
0.50
32.00
11.20
2.54
24.64
27.94
26.67
1.54
2.03
Top View
20.30
3.81
6.35
2.54
23.40
Recommended Footprint DetailsRecommended Footprint Details
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Pin Connections DIP24 SMD
Pin # Single Dual
1 CTRL CTRL
2 –Vin –Vin
3 –Vin –Vin
9 NC Com
11 NC –Vout
14 +Vout +Vout
16 – Vout Com
22 +Vin +Vin
23 +Vin +Vin
4,5,10,12 NC
13,15,20,21,24 NC
NC = No Connection
Bottom View
Top View
11
9
32
14
16
22
23
1
15.24
2.54
1.00
ø
+0.15/0
0.50
32.00
10.20
20.30
4.1+0.25 /-0.5
2.03
2.54
REC10-S_DRW(Z)/H*/A/M
Series
ECONOLINE
DC/DC-Converter
Recommended Footprint DetailsRecommended Footprint Details
The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit
written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer
shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications.
REV: 0/2015 E-165www.recom-power.com

REC10-4815SRW/H2/A/M/SMD

Mfr. #:
Manufacturer:
RECOM Power
Description:
Isolated DC/DC Converters 10W DC/DC 2kV REG 2:1 36-75Vin 15Vout
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union