OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

LQH3NPZ100MMEL

P1-P3P4-P6P7-P8
SpecNo.JELF243A-9140B-01 P1/8
MURATA MFG.CO., LTD
Reference Only
CHIP COIL (CHIP INDUCTORS) LQH3NPZ□□□□MEL SPECIFICATION
Murata Standard Reference Specification【AEC-Q200】
1.Scope
This reference specification applies to Chip coil (Chip Inductors) LQH3NPZ_ME series for Automotive Electronics based
on AEC-Q200 except for Power train and Safety.
2.Part Numbering
(ex) LQ H 3N P Z 1R0 M M E L
Product ID Structure Dimension Applications Category Inductance Tolerance Dimension Others Packaging
(L×W) and (T) L: Φ180Taping
Characteristics
3.Rating
・Operating Temperature Range.
(Ambient temperature; Self-temperature rise is not included) -40 to +105°C
(Product temperature; Self- temperature rise is included) -40 to +125°C
・Storage Temperature Range.
-40 to +125°C
Customer
Part Number
Murata
Part Number
Inductance
DC
Resistance
(Ω)
Self
Resonant
Frequency
(MHz min)
Rated Current(mA)
ESD
2: 2kV
∗1 Based on
inductance
change
∗2 Based on
Temperature rise
(µH)
Tolerane
(%)
∗3 Ambient
temperature
(85 )℃
∗4 Ambient
temperature
(105 )℃
LQH3NPZ1R0MMEL 1.0
M:±20%
0.025±20% 100 2350 3000 1600
2
LQH3NPZ2R2MMEL 2.2 0.065±20% 60 1800 2100 1220
LQH3NPZ3R3MMEL 3.3 0.084±20% 55 1520 1900 1150
LQH3NPZ4R7MMEL 4.7 0.10±20% 40 1300 1700 1000
LQH3NPZ6R8MMEL 6.8 0.14±20% 30 1040 1450 900
LQH3NPZ100MMEL 10 0.19±20% 20 810 1280 800
LQH3NPZ150MMEL 15 0.29±20% 15 660 1020 620
LQH3NPZ220MMEL 22 0.40±20% 10 570 860 540
LQH3NPZ330MMEL 33 0.55±20% 8 440 760 460
LQH3NPZ470MMEL 47 0.82±20% 5 380 610 380
LQH3NPZ560MMEL 56 1.0±20% 5 350 500 320
LQH3NPZ680MMEL 68 1.15±20% 5 310 470 300
LQH3NPZ101MMEL 100 1.59±20% 3 260 430 270
∗1:When applied Rated current to the Products , Inductance will be within ±30% of initial inductance value range.
∗2:Keep the temperature (ambient temperature plus self-generation of heat) under 125 . ℃
∗3:When applied Rated current to the Products ,temperature rise caused by self-generated heat shall be limited to 40 ℃
max. (Ambient temperature 85 ).℃
∗4:When applied Rated current to the Products ,temperature rise caused by self-generated heat shall be limited to
20 max.℃ (Ambient temperature 85 to 105 ).℃
4. Testing Conditions
《Unless otherwise specified》 《In case of doubt》
Temperature : Ordinary Temperature (15 to 35°C) Temperature : 20C± 2°C
Humidity : Ordinary Humidity (25 to 85 %(RH) Humidity : 60 to 70%(RH)
Atmospheric Pressure : 86 to 106 kPa
SpecNo.JELF243A-9140B-01 P2/8
MURATA MFG.CO., LTD
Reference Only
3.0±0.2
3.0±0.1
0.9±0.2
3.0±0.2
1R0
1.1±0.1
■Unit Mass (Typical value)
0.034g
(in mm)
0.9±0.1
0.9±0.2
3.0±0.1
3.0±0.2
3.0±0.2
0.8±0.3 0.8±0.3
1.4+/-0.1
5.Appearance and Dimensions
■Unit Mass (Typical value)
0.051g
(in mm)
6.Product Marking
Inductance
Three digists :
0.47μH
→ R47
1.0μH
→ 1R0
10μH
→
100
7.Electrical Performance
No. Item Specification Test Method
7.1 Inductance Inductance shall meet item 3. Measuring Equipment : KEYSIGHT 4192A or equivalent
Measuring Frequency: 1MHz
7.2 DC Resistance DC Resistance shall meet item 3. Measuring Equipment: Digital multi meter
7.3 Self Resonant
Frequency
(S.R.F)
S.R.F shall meet item 3. Measuring Equipment: KEYSIGHT 4991A or equivalent
8. AEC-Q200 Requirement
8.1 Performance (based on Table 5 for Magnetics(Inductors / Transformer)
AEC-Q200 Rev.D issued June. 1 2010
AEC-Q200
Murata Specification / Deviation
No Stress Test Method
3 High
Temperature
Exposure
1000hours at 125 deg C
Set for 24hours at room
temperature, then measured.
Meet Table A after testing.
Table A
4 Temperature Cycling 1000cycles
-40 deg C to + 105deg C
Set for 24hours at room
temperature,then measured.
Meet Table A after testing.
7 Biased Humidity 1000hours at 85 deg C, 85%RH
unpowered.
Meet Table A after testing.
Appearance No damage
Inductance change (at 1MHz) Within ±10%
DC Resistance Change Within ±10%
SpecNo.JELF243A-9140B-01 P3/8
MURATA MFG.CO., LTD
Reference Only
AEC-Q200
Murata Specification / Deviation
No Stress Test Method
8 Operational Life Apply Rated Current 85 deg C
1000 hours
Set for 24hours at room
temperature, then measured
Meet Table A after testing.
9 External Visual
Visual inspection No abnormalities
10 Physical Dimension Meet ITEM 5
(Style and Dimensions）
No defects
12 Resistance
to Solvents
Per
MIL-STD-202
Method 215
Not Applicable
13 Mechanical Shock
Per MIL-STD-202
Method 213
Condition C
100g’s/6ms/Half sine
Meet Table A after testing.
14 Vibration 5g's for 20 minutes,
12cycles eah of 3 orientations
Test from 10-2000Hz.
Meet Table A after testing.
15 Resistance
to Soldering Heat
No-heating
Solder temperature
260C+/-5 deg C
Immersion time 10s
Pre-heating: 150 to 180C /90±30s
Meet Table B after testing.
Table B
17 ESD
Per AEC-Q200-002 ESD Rank: Refer to Item 3. Rating
No defects
18 Solderbility Per J-STD-002 Method b : Not Applicable
90% of the terminations is to be soldered.
(Except exposed wire)
19 Electrical
Characterization
Measured : Inductance No defects
20 Flammability
Per UL-94 Not Applicable
21 Board Flex Epoxy-PCB(1.6mm)
Deflection 2mm(min)
60s minimum holding time
Holding time: 5s
Meet Table A after testing.
22 Terminal Strength Per AEC-Q200-006
A force of 17.7N for 60s
No defects
Appearance No damage
Inductance change (at 1MHz) Within ±20%
DC Resistance Change Within ±10%
P1-P3P4-P6P7-P8

LQH3NPZ100MMEL

Mfr. #:
Buy LQH3NPZ100MMEL
Manufacturer:
Description:
Inductor Power Chip Shielded Wirewound 10uH 20% 1MHz Ferrite 1.28A 228mOhm DCR 1212 Automotive T/R
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet