https://www.phoenixcontact.com/pi/products/1987753
08/18/2018Page2/5
Screw compact terminal block-PT 2,5/ 5-5,0-V-1987753
Technical data
General
Range of articles PT 2,5/..-V
Insulating material group I
Rated surge voltage (III/3) 4 kV
Rated surge voltage (III/2) 4 kV
Rated surge voltage (II/2) 4 kV
Rated voltage (III/3) 250 V
Rated voltage (III/2) 400 V
Rated voltage (II/2) 630 V
Connection in acc. with standard EN-VDE
Nominal current I
N
32 A
Nominal cross section 2.5 mm²
Maximum load current
32 A (current values dependent on no. of pos., dimensioning of printed
circuits, and ambient temperature)
Insulating material PA
Flammability rating according to UL 94 V0
Internal cylindrical gage A3 / B3
Stripping length 6.5 mm
Number of positions 5
Screw thread M3
Tightening torque, min 0.45 Nm
Tightening torque max 0.5 Nm
Connection data
Conductor cross section solid min. 0.5 mm²
Conductor cross section solid max. 4 mm²
Conductor cross section flexible min. 0.5 mm²
Conductor cross section flexible max. 4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min. 0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min. 0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm²
Conductor cross section AWG min. 20
Conductor cross section AWG max. 10
2 conductors with same cross section, solid min. 0.5 mm²
2 conductors with same cross section, solid max. 1.5 mm²
2 conductors with same cross section, stranded min. 0.5 mm²
2 conductors with same cross section, stranded max. 1.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
0.75 mm² The technical data regarding clamping with ferrules applies
only when using crimping pliers ZA 3. When using ferrules, it is
necessary to take into account possible restrictions regarding nominal
voltage.