AMT303‐DMK
The AMT303-DMK is an easy-to-use demo kit designed for the AMT303 commutation
modular encoder. The kit allows for stand-alone demonstration or through pc access to the
SPI interface in production. It is an outstanding tool for experimentation and familiarization
with the AMT303 features.
Kit includes:
AMT303-V modular encoder kit
Demo board
AMT303 to demo board cable
USB cable
Flash drive containing:
o User guide
o Software
o Example TLC code
Power adapter
A full range of functions are accessible including position read, zero set, CW/CCW
incrementing, U/V/W position, pole pair designation, stepper motor commands and others.
Most functions can be manipulated via a PC using the software or the pushbuttons on the
demo board. Software includes the required VCP (Virtual COM Port) drivers for all
Windows™
,Mac™, and Linux™ operating systems.
The board includes three I/O connectors – a 10 pin header for communicating directly with
the included AMT303, a 20 pin expansion header for stepper motor control, and a 12 pin
PicKit2 header for manipulation of the on-board PIC MCU.
