SML-D12U1WT86 Datasheet SML-D12U1WT86 | P4-P6

[Data Sheet]

■Rank Reference of Brightness*

*Measurement tolerance:±10%

[SML-D12x1 series]

Red (V, U)

(Ta=25ºC, I

＝20mA)

Rank

Iv (mcd)

2.5〜4.0 4.0〜6.3 6.3〜10 10〜16 16〜25 25〜40 40〜63 63〜100 100〜160

SML-D12V1W

SML-D12U1W

Orange(D)

(Ta=25ºC, I

＝20mA)

Rank

Iv (mcd)

2.5〜4.0 4.0〜6.3 6.3〜10 10〜16 16〜25 25〜40 40〜63 63〜100 100〜160

SML-D12D1W

Yellow (Y)

(Ta=25ºC, I

＝20mA)

Rank

Iv (mcd)

2.5〜4.0 4.0〜6.3 6.3〜10 10〜16 16〜25 25〜40 40〜63 63〜100 100〜160

SML-D12Y1W

Yellowish Green(M)

(Ta=25ºC, I

＝20mA)

Rank

Iv (mcd)

2.5〜4.0 4.0〜6.3 6.3〜10 10〜16 16〜25 25〜40 40〜63 63〜100 100〜160

SML-D12M1W

＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿

www.rohm.com

4/9

2017.11 - Rev.005

[Data Sheet]

■Taping(T86)

Unit:ｍｍ

Note)Tolerance is within ±0.2mm unless

otherwise specified.

■Part No. Construction

■Packing Speciﬁcation

ROHM LED products are being shipped with desiccant (silica gel) included in moisture-proof bags.

or enclosing the humidity indication card inside the bag is available upon request.

Please contact the nearest sales office or distributer if necessary.

Pasting the moisture sensitive label on the outer surface of the moisture-proof bags

[SML-D12x1 series]

8.0

1.75

3.5

5.5

0～0.5

1.9

φ180

φ60

φ13

±0.1

±0.05

φ1.5

＋0.1

±0.1

-3

±0.05

0.73

Packing quantity

3,000pcs/reel

Pull

direction

11.4

±1

+0.1

-0.07

+0.1

-0.07

±0.1

0.2

± 0 . 0 5

*"-"will be taken out for emitting color Special Code will be applied for Chromaticity rank Rank sign

WB/B/E series. Emitting color WB/B/E series. (for white LED） (Brightness Rank)*

Series name Package Type Chip type Emitting Color Resin Color Taping Specification

SML

P1 0

V T

E1 1

U W

U2 B

Y2 notice）S1 series、81 seires

Z1/ZN

81/82

K1 M

*Concerning the Brightness rank.

S1 F

*Please refer to the rank chart above for

P2 P

luminous intensity classification.

52 E

*Part name is individual for each rank.

P34

*When shipped as sample,the part name will

P36

be a representative part name.

General products are free of ranks.

RGB

Please contact sales if rank appointment

SCM

is needed.

Standard Type

1S M L － D 62 V 1 W T 8

Yellow

Orange

High Brightness type

Red

Chip LED

1.0x0.6 t=0.2mm

1.6x0.8 t=0.36mm

Red

1.6x0.8 t=0.55mm

Low Current Type

Red

4.5x2.0 t=0.6mm

Yellowish green

Cathode at sprocket hole side(the back)

1.6x1.15 t=0.55mm

T68

Cathode at sprocket hole side(the top)

T86

Ultra High Brightness type

3.0x2.0 t=1.3mm

3.5x2.8 t=1.9mm

Yellowish green

Yellow

3.4x1.25 t=1.1mm

2.0x1.25 t=0.8mm

Yellow

1.3x1.5 t=0.6mm

Green

3.2x1.6 t=1.85mm

Green

1.0x1.0 t=0.2mm

Green

3.5x2.8 t=0.6mm

Phototransistors

Chip LED

1.0x1.0 t=0.2mm

Blue

1.5x1.0 t=0.2mm

White

Red/Green/Blue

3.0x1.5 t=2.2mm

For white LED,

csthode at sprocket hole side

Transparent Colorless

T86

Cathode at sprocket hole side(the top)

Anode at sprocket hole side(the top)

Milkey White

T87

1Black

＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿

www.rohm.com

5/9

2017.11 - Rev.005

[Data Sheet]

１．Storage

If the product is heated during the reflow under the condition of hygroscopic state,

it may vaporize and expand which will influence the performance of the product.

Therefore, the package is waterproof. Please use the product following the conditions:

・Using Conditions

・Baking

Bake the product in case of below:

①The expiration date is passed.

②The indicator of HIC(Humidity Indicator Card) become discolored immediately

after the MBB is opened.

③The color of indicator (silica gel) turned from blue to colorless or from green to pink.

・Baking Conditions

２．Application Methods

２－１．Precaution for Drive System and Oﬀ Mode

Design the circuit without the electric load exceeding the ABSOLUTE MAXIMUM RATING that

please do not apply voltage neither forward nor reverse. Especially, for the products with the

Ag-paste used in the die bonding, there’s high possibility to cause electro migration and result

２－２．Derating

　The Derating Characteristics are based on the lifetime of luminous intensity and assumption

of degradation & color change of sealing resin or reflector. About its reliability,

２－３．Operation Life Span

There’s possibility for intensity of light drop according to working conditions and environments

(applied current, surrounding temperature and humidity, corrosive gases), please call our Sales

①Longtime intensity of light life

②On mode all the time

２－４．Applied Stress on Product

No resin hardening agent such as filler is used in the sealing resin of the product.

Therefore, please pay attention to the overstress on it which may influence its reliability.

２－５．Usage

The Product is LED. We are not responsible for the usage as the diode such as Protection Chip,

(Deviation of VF Value will cause deviation of current in LED.) Furthermore, for off mode,

in function failure.

please evaluate its using conditions and environment and use it after confirmed there is no problem.

staffs for inquiries about the concerned application below.

in ordinary electronic equipment, so that we do not guarantee the usage in devices requiring

extremely high reliability (such as car equipment, medical equipment, traffic equipment,

aircraft etc.).

Rectifier, Switching and so on. The product is designed and manufactured for application

(Even if the product is within the expiration date.)

60±3℃

12〜24h

Below 20%RH

Remark

so please try not to apply stress on it.

・Recommend bake once.

applies on the products. If drive by constant voltage, it may cause current deviation of the LED and

result in deviation of luminous intensity, so we recommend to drive by constant current.

Please storing in the airtight container

Temperature

Time

Humidity

・Bake products in reel.

・Reel and embossed tape are easy to be deformed when baking,

①Before using 5〜30℃ 30〜60%RH

Within 1 year

from Receiving

Storage with waterproof package

■Precaution (Surface Mount Device)

②After opening

package

5〜30℃ Below 60%RH Within 168h

Remark

[SML-D12x1 series]

Temperature

Humidity

Expiration Date

with our desiccant (silica gel)

Classification

＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿

www.rohm.com

6/9

2017.11 - Rev.005

P1-P3 P4-P6 P7-P9 P10-P11

SML-D12U1WT86

Mfr. #:

Buy SML-D12U1WT86

Manufacturer:

ROHM Semiconductor

Description:

Standard LEDs - SMD Red 620nm 63mcd Vf 2.2V Pd 54mW

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

SML-D12U1WT86