CC-WMX-JN58-NE Datasheet CC-WMX-JN58-NE, CC-MX-JN58-Z1, CC-MX-JN7A-Z1 | P1-P2

BLOCK DIAGRAM

RELATED PRODUCTS

ConnectCard®

for i.MX28

Digi Connect® Digi XBee®

Modules

ConnectCore® 6

Rabbit®

Intelligent and connected embedded system-on-module based on the NXP i.MX6 UL,

with turnkey Linux soware support in a stamp-sized form factor.

The ConnectCore 6UL module delivers a secure and extremely

cost-eective connected System-on-Module platform that is

slightly bigger than a postage stamp.

Its patent-pending Digi SMTplus™ surface mount form factor

allows you to choose simplified design integration leveraging

proven and easy-to-use edge-castellated SMT technology, or a

versatile LGA option for ultimate design flexibility with access

to virtually all interfaces.

Built on the NXP i.MX6UL application processor, the module

is the intelligent communication engine for today’s secure

connected devices. It seamlessly integrates dual-Ethernet

and pre-certified dual-band Wi-Fi (802.11a/b/g/n/ac) with

Bluetooth 4.2 connectivity.

Embedded device security is a critical design aspect for the

growing number of connected applications (“IoT”) and the

ConnectCore 6UL removes the implementation barriers by

providing you with a fully integrated, secure module platform

with complete Linux soware support.

CONNECTCORE

6UL

SECURE, CONNECTED

SYSTEM-ON-MODULE

ARM® Cortex™-A7 Core

32 KB I-Cache

per Core

32 KB D-Cache

per Core

NEON per Core PTM per Core

CPU Platform

128 KB L2-Cache

CSC, Combine, Rotate,

Programmable Proc. Engine

24-bit- Parallel CSI

24-bit- Parallel LCD

MULTIMEDIA

Micro-

controller

Assist™

802.11

a/b/g/n/ac

1x1

eMMC 4.5/SD 3.0 x2

NAND Ctrl (BCH40)

UART x8

SIM V2/EMVSIM x2

8x8 Keypad

S /SAI x3

ASRC

FlexCAN x2

10/100 ENET x2

with IEEE 1588

C x4

PLL, Osc.

Secure JTAG

RTC & Reset

IOMUX

Smart DMA

PWM x8

Timer x4

LDO

ADC x2 (10-ch)

w/touch ctrl

Watch Dog x3

INTERNAL MEMORY

CONNECTIVITY

SYSTEM CONTROL

POWER MGMT

SPI x4

GPIO

S/PDIF Tx/Rx

ADC

Temp Monitor

EXTERNAL MEMORY

Dual-Channel Quad SPI x1

16-bit LP-DDR2/DDR3/DDR3L

Parallel NOR Flash

USB2 OTG w/ PHY x2

96 KB ROM

128 KB RAM

SECURITY

Ciphers

eFuse

RNG

Secure RTC

PF3000

PMIC

Up to

2 GB

SLC NAND

Up to

1 GB

DDR3

Secure

Element

Bluetooth

4.2

BENEFITS

– Secure, connected, highly cost-eective system-on-module

– NXP i.MX6UL-2, Cortex-A7 @ 528 MHz

– Up to 2 GB NAND flash, up to 1 GB DDR3

– Stamp-sized and flexible Digi SMTplus form factor

– Pre-certified 802.11a/b/g/n/ac + Bluetooth 4.2 option

– Integrated dual 10/100 Ethernet connectivity

– Dedicated on-module security + authentication controller

– Unique ultra-low power and wake-up state management

– Turnkey embedded Linux soware platform with Digi

TrustFence™ embedded device security framework

– Long-term availability and 5-year warranty

DIGI INTERNATIONAL WORLDWIDE HQ

877-912-3444 / 952-912-3444 / www.digi.com

DIGI INTERNATIONAL FRANCE

+33-1-55-61-98-98 / www.digi.fr

DIGI INTERNATIONAL JAPAN

+81-3-5428-0261 / www.digi-intl.co.jp

DIGI INTERNATIONAL SINGAPORE

+65-6213-5380

DIGI INTERNATIONAL CHINA

+86-21-50492199 / www.digi.com.cn

DIGI SERVICE AND SUPPORT / You can purchase with confidence knowing that Digi

is always available to serve you with expert technical support and our industry

leading warranty. For detailed information visit www.digi.com/support.

All trademarks are the property of their respective owners.

SPECIFICATIONS

ConnectCore® 6UL

FEATURES

APPLICATION PROCESSOR

NXP i.MX6UL-2, ARM® Cortex®-A7 @ 528 MHz, 128 KB L2 cache, with NEON™ MPE (Media Processor Engine) co-processor

and programmable smart DMA (SDMA) controller

MEMORY

Up to 2 GB NAND flash (SLC), up to 1 GB DDR3

PMIC

NXP PF3000

VIDEO/GRAPHICS

2D Pixel Processing Pipeline (PXP) for color-space conversion, scaling, alpha-blending, and rotation, 8-/16-/18-/24-bit parallel LCD Dis-

play up to WXGA (1366x768), 8/10/16/24-bit Parallel CSI with BT.656 support

SECURITY

Dedicated cryptographic co-processor (Secure Element) with hardware assisted Eliptic Curve support: FIPS 186-4 Elliptic Curve Digital

Signature (ECDSA), NIST SP800-56A Elliptic Curve Diie-Hellman (ECDH), NIST Standard P256 Elliptic Curve, 256-bit SHA/HMAC,

X.509 certificate support, Multilevel RNG (NIST SP 800-90A DRBG), Tamper Monitor, 72-bit unique device ID, i.MX6UL Cryptographic

Acceleration and Assurance Module (CAAM): AES 128/256, DES/3DES, ARC4, RSA (4096), MD5, SHA-1/224/256, HMAC, AES-CMAC, AES-

XCBC-MAC, AES-CCM, TRNG with hardware entropy source (NIST SP-800-90A), Digi TrustFence™ Embedded Security Framework

PERIPHERALS/INTERFACES

1 x dedicated MMC 4.5/SD 3.0/SDIO Port (1-/2-4-bit), 2 x USB 2.0 OTG with PHY, 3x I2S/SAI, 1 x S/PDIF Tx/Rx, 2 x FlexCAN (2.0b), 4 x I2C,

4 x SPI, 7 x UART, 4 x Timer, 8 x PWM, 3 x Watchdog, 2 x 12-bit ADC (10 channels) with 4-wire/5-wire touch controller, up to 103 GPIOs

EXTERNAL BUS

16-bit address / up to 16-bit data (multiplexed and non-multiplexed modes)

ETHERNET

Dual 10/100 Mbit Ethernet MAC + IEEE 1588

WIRELESS

802.11a/b/g/n/ac 1x1 (MCS 0-9), Bluetooth 4.2 with strong WPA2-Enterprise authentication/encryption for Wi-Fi connections

MCA™ MICROCONTROLLER ASSIST

Ultra-low power ARM® Cortex®-M0+, up to 48 MHz (NXP Kinetis KL03: KL03P24M48SF0)

OPERATING TEMPERATURE

-40° C to +85° C

STORAGE TEMPERATURE

-50° C to +125° C

RELATIVE HUMIDITY

Relative humidity 5% to 90% (non-condensing)

ALTITUDE

Altitude 12,000 feet (3,658 meters)

RADIO APPROVALS***

US, Canada, EU, Japan, Australia/New Zealand

EMISSIONS / IMMUNITY / SAFETY

FCC Part 15 Class B, EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, ICES-003 Class B, VCCI Class II, AS 3548,

FCC Part 15 Subpart C Section 15.247, IC (Industry Canada), RSS-210 Issue 5 Section 6.2.2(o), EN 300 328, EN 301 489-17,

EN 55024, EN 301 489-3, Safety UL/UR (or equivalent)

DESIGN VERIFICATION

Temperature: IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-78; Vibration/Shock: IEC 60068-2-6, IEC 60068-2-64, IEC 60068-2-27, HALT

MOUNTING / PIN COUNT

Common Digi SMTplus* surface mount footprint using 76-pad edge castellated pads (1.27 mm pitch) or 245-pad LGA (1.27 mm pitch) option

MECHANICAL DIMENSIONS

29 mm x 29 mm x 3.5 mm

POWER CONSUMPTION

Idle Mode (Linux up, no networking): 100mA @ 5V

Idle Mode (Linux up, with 25% Wi-Fi transmit): 118mA @ 5V

Standby Mode (w/memory refresh): 6mA @ 5V

ULTRA LOW-POWER MODES

Event Trigger Mode: 25μA @ 3V (i.MX6UL o, MCA LLS w/HS Comparator active)**

Scheduled Wake-Up Mode: 25μA @ 3V (i.MX6UL o, MCA LLS w/HS Comparator active)**

91003241

A10/417

PART NUMBERS DESCRIPTION

KITS

CC-WMX6UL-START

ConnectCore 6UL SBC Express, 87 x 63 mm, Industrial temp, 256 MB SLC NAND, 256 MB DDR3, single 10/100 Ethernet,

802.11a/b/g/n/ac, Bluetooth 4.2, PCB antenna, USB , UART, microSD, Pi HAT and Grove connectors, power (USB + header), and accessories

CC-WMX6UL-KIT

ConnectCore 6UL SBC Pro, Pico-ITX (100 x 72 mm), Industrial Temp, 256 MB SLC NAND, 256 MB DDR3, Dual 10/100 Ethernet,

802.11a/b/g/n/ac, Bluetooth 4.2, XBee socket, cellular connectivity support via PCI Express Mini Card, SIM, NFC, microSD, USB Host, USB

OTG, UART, DualCAN, SPI, I

C, LVDS, camera, antenna connector, battery connector, power supply, and accessories

CONNECTCORE 6UL – SECURE WIRELESS MODULE

CC-WMX-JN58-NE

ConnectCore 6UL-2, 528 MHz, Industrial Temp, 256 MB SLC NAND, 256 MB DDR3, Dual 10/100 Ethernet, 802.11a/b/g/n/ac,

Bluetooth 4.2, ANT+

CONNECTCORE 6UL – SECURE ETHERNET MODULE

CC-MX-JN58-Z1 ConnectCore 6UL-2, 528 MHz, Industrial Temp, 256 MB SLC NAND, 256 MB DDR3, Dual 10/100 Ethernet

TRUSTFENCE

* Patent-Pending ** Estimated, based on use-case *** Final certifications pending

P1-P2

CC-WMX-JN58-NE

Mfr. #:

Buy CC-WMX-JN58-NE

Manufacturer:

Digi International

Description:

System-On-Modules - SOM Wi-i.MX6UL SOM 802.11ac, 256 MB

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

CC-WMX-JN58-NE

CC-WMX-JN58-NE

Products related to this Datasheet