|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PIR Sensor Light Switch
12-07-0006 PT0192-3 07/06/12
1
Product Features Product Description
Operating voltage: 5V (Typ.)
Average supply current: 120µA (Typ.)
2 stage op-amp for filter.
Build-in noise rejection circuit.
On-chip regulator.
Adjustable output duration
Override function.
ON/AUTO/OFF selectable by MODE pin
Apply to AC 220V/50Hz and 110V/60Hz.
Auto-reset if the ZC signal disappears over 3
seconds
Output pulse (PT8A2641/5/7) to drive triac or
output level (PT8A2642/6/8) to drive relay.
CDS to enable/disable output.
40 second warm-up.
Quick check mode for installation.
The PT8A264X is a CMOS LSI chip designed
for use in automatic PIR lamp control. It can operate
with a 2-wire configuration for triac applications or
with a 3-wire configuration for relay applications.
The chip is equipped with operational amplifiers, a
comparator, timer, a zero crossing detector, control
circuit, a voltage regulator, a system oscillator, and
an output timing oscillator.
Its PIR sensor detects infrared power variations
induced by the motion of a human body and
transforms it to a voltage variation. If the PIR output
voltage variation conforms to the criteria (refer to the
functional description), the lamp is turned on with an
adjustable duration. The PT8A264X offers three
operating modes (ON, AUTO, OFF) which can be set
through the MODE pin. While the chip is working in
the AUTO mode the user can override it and switch
to the quickly install mode, or manual ON mode, or
return to the AUTO mode by switching the power
switch.
Block Diagram
Figure 1 Block Diagram
OP2O
OP2N
OP2P
OP1O
OP1P
OP1N
OSCD
OSCS ZC
RSTB
Vcc
GND
RELAY
MODE
CDS
TRIAC
Comparator latch circuit
Mode and CDS
control circuit
Control
circuit
Voltage
divider
Regulator
delay
oscillator
System
oscillator
Frequency
divider
Delay
circuit
Zero cross
debounce
Output
circuit
_
+
+
_
VEE
COMPO
CDSO
