Performance
Measured performance can vary for a number of reasons. The major factors affecting
drive performance are the capacity of the drive and the interface of the host. Addition-
ally, overall system performance can affect the measured drive performance. When
comparing drives, it is recommended that all system variables are the same, and only
the drive being tested varies.
Performance numbers will vary depending on the host system configuration.
For SSDs designed for the client computing market, Micron specifies performance in
FOB state.
For a description of these performance states and of Micron's best practices for per-
formance measurement, refer to micron.com/ssd.
Table 4: Drive Performance
Capacity 120GB 240GB 480GB
UnitInterface Speed 6 Gb/s 6 Gb/s 6 Gb/s
PCMark Vantage 70,000 80,000 80,000 HDD score
Sequential read (128KB transfer) 500 500 500 MB/s
Sequential write (128KB transfer) 130 250 400 MB/s
Random read (4KB transfer) 62,000 72,000 80,000 IOPS
Random write (4KB transfer) 35,000 60,000 80,000 IOPS
READ latency (MAX) 5 5 5 ms
WRITE latency (MAX) 25 25 25 ms
READ latency (TYP) 160 160 160 µs
WRITE latency (TYP) 40 40 40 µs
Notes:
1. Performance numbers are maximum values, except as noted.
2. Typical I/O performance numbers as measured using Iometer with a queue depth of 32
and write cache enabled. Fresh-out-of-box (FOB) state is assumed. For performance
measurement purposes, the SSD may be restored to FOB state using the secure erase
command.
3. Iometer measurements are performed on an 20GB span of logical block addresses
(LBAs).
4. 4KB transfers used to measure READ/WRITE latency values with write cache enabled.
5. System variations will affect measured results. For comparison, PCMark scores are meas-
ured with the SSD as a secondary drive in a two-drive system. When measured as an OS
drive, system overhead can cause lower scores.
M500 mSATA NAND Flash SSD
Performance
PDF: 09005aef850c7382
m500_msata_2_5_ssd.pdf - Rev. G 8/14 EN
6
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2013 Micron Technology, Inc. All rights reserved.
