Preliminary
Heat Sinking and Mounting
The Indus Star™ has six mounting points for #4 screws. It should be attached to additional heat
sinking for proper thermal management. At minimum, a heat sink of a metal plate (copper or
aluminum), attached using a thermal interface material (such as LUXdrive HexaTherm™ A001),
should be used to increase the area exposed to free air. The Indus Star
™
Metal Core Printed Circuit
Board has a backing plate that is electrically isolated from the emitter. It is not necessary to use an
electrically insulated thermal interface material.
Drivers
LUXdrive oers a line of drivers designed for use with high-power LED modules such as the
Indus Star™. The choice of driver will depend upon the number of modules to be driven, the input
voltage source, and the desired forward drive current. See the full line of LUXdrive products at
www.LUXdrive.com
©2011 LUXdrive, A Division of LEDdynamics, Inc. www.LUXdrive.com.
Specications subject to change without notice. April, 2011 - Rev 1.2
M
a
d
e
i
n
t
h
e
U
S
A
LEDdynamics, Inc.
802.728.4533 P
802.728.3800 F
sales@LUXdrive.com
www.LUXdrive.com
High-Power LED Light Module
A007/A008 Indus Star
TM
DATA SHEET Page 4 of 6
Optics
The Indus Star
™
can be tted with many dierent optics from major optics manufacturers. On the
A007 there are four indentations on the board, designed as registration holes for the Carclo
CO-1041x series of optics. These small 10mm optics are available in multiple viewing angles and
work extremely well in applications where a low prole is desired.
Part Number
Compatible With
A007 & A008
A007 & A008
A001-010H
A001-150H
Number of
Parts
10
150
Description
HexaTherm™ Thermal Adhesive
HexaTherm™ Thermal Adhesive
Part Number
Full Width
Viewing Angle
12.4°
14.3°
28.8°
Compatible With
A007
A007
A007CO-10003-15
CO-10003
CO-10138
Number of
LEDs
1
1
1
21.2° A007CO-10139
1
Description
Ripple Medium
Plain Tight
Frosted Narrow
Frosted Medium
41.6°
31.1°
44.1° x11.9°
A007
A007
A007CO-10003-L25
CO-10003-25
CO-10140
1
1
1
12.6° x 47.1°
A007CO-10192
1
Elliptical
Ripple Wide
Frosted Wide
Elliptical Orthogonal
Indus XP-G
Star Optics
A007CO-10734 1Universal Holder
TYPE
Table 3
Table 4
