Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
ESD Suppressor
-30
-25
-20
-15
-10
-5
0
5
1 10 100 1000 10000
Frequency(MHz)
Attenuation (dB)
-50
0
50
100
150
200
250
300
350
400
-20 0 20 40 60 80 100 120 140 160 180 200
Times (nSecs)
Volts (V)
HDMI Controller
)%.*
3Y5Y
Antenna
Ga/As-SW
or
ASM
c
a
b
ESD Suppressor
Type
(inch size)
Dimensions (mm)
abc
EZAEG1A
(0201)
0.3 to 0.4 0.8 to 0.9 0.25 to 0.35
EZAEG2A
(0402)
0.5 to 0.6 1.4 to 1.6 0.4 to 0.6
EZA
EG3A
(0603)
0.7 to 0.9 2.0 to 2.2 0.8 to 1.0
(1) Capacitance = The capacitance value shall be measured under the conditions speci ed below.
Frequency : 1 MHz±10 %, Voltage : 1 Vrms±0.2 Vrms, Temperature : 25 °C±2 °C
(2) Peak Voltage = The peak voltage value shall be measured under the following conditions. ESD test conditions : IEC61000-4-2, 8 kV contact discharge
(3) Clamping Voltage = The clamping voltage value shall be measured at 30 ns after initiation of pulse and measured under the conditions speci ed below.
ESD test conditions : IEC61000-4-2, 8 kV contact discharge
■ Ratings
■ Frequency Characteristics ■ ESD Suppression Voltage Waveform
■ Typical Circuits Requiring Protection
● HDMI circuit ● Antenna circuit
Type
(i
nch size)
Capacitance
(1)
Peak Voltage
(2)
Clamping
Voltage
(3)
Rated Voltage
Category Temperature Range
EZAEG1A (0201) 0.04
+0.04
pF
500 V max.
(350 V typ.)
100 V max. 30 V max –55 to +125 °C
EZAEG2A (0402) 0.05
+0.05
pF
EZAEG3A (0603) 0.10
+0.10
pF
–0.04
–0.03
–0.08
Recommended land pattern design for ESD Suppressor is shown below.
■ Recommended Land Pattern
■ Packaging Methods, Soldering Conditions and Safety Precautions
Please see Data Files
Nov. 201201