MLV1210E33503T

MLV1210E3
www.vishay.com
Vishay BCcomponents
Revision: 30-Apr-15
1
Document Number: 29127
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMD 1210 Multilayer Varistor
FEATURES
Surface mount multilayer surge suppressor
Inherent bidirectional clamping
Excellent energy/volume ratio
Suitable for reflow soldering
Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
Over-voltage and transient voltage protection:
Data lines and I/O port protection
Protection against ESD transients
On-board protection of IC’s and transistors
Modem protection
LCD protection
DESCRIPTION
Size 1210 (M3225) multilayer chip varistor with NiSn
terminations.
PACKAGING
Available in 8 mm embossed carrier tape, component pitch
4 mm on 180 mm reels containing 2000 pieces.
Notes
Sinusoidal voltage assumed as normal operating condition.
If a non-sinusoidal voltage is present, the crest voltage x 0.707 should be used for type selection.
Breakdown voltage at a current of 1 mA, measured according to 4.5 of IEC 61051-1.
Parts are not recommended for automotive applications.
QUICK REFERENCE DATA
PARAMETER VALUE UNIT
Maximum continuous voltage
DC 5.6 to 45.0 V
AC 4.0 to 35.0 V
Maximum clamping voltage
at 2.5 A
22.0 to 95.0 V
Capacitance range
(at 1 kHz)
650 to 5000 pF
Maximum energy
(10/1000 μs)
0.4 to 2.2 J
Maximum peak current
(8/20 μs)
250 to 400 A
Operating temperature range -55 to 85 °C
Weight ± 0.030 g
ELECTRICAL DATA AND ORDERING INFORMATION
WORKING VOLTAGE
BREAKDOWN
VOLTAGE
CLAMPING
VOLTAGE
MAX. PEAK
CURRENT
MAXIMUM
ENERGY
CAPACITANCE PART NUMBER
V
RMS
V
DC
V
b
V
C
I
p
E
t
CSAP
V V V V A J pF MLV1210E3
< 50 μA 1 mA 2.5 A, 8/20 μs 8/20 μs 10/1000 μs 1 kHz
4.0 5.6 7.0 to 10.0 22.0 250 0.4 5000 0403T
14.0 18.0 21.6 to 26.0 48.0 400 1.5 2000 1403T
20.0 26.0 31.0 to 38.0 62.0 400 1.9 1500 2003T
25.0 30.0 37.0 to 46.0 77.0 400 1.9 1200 2503T
35.0 45.0 50.4 to 61.6 95.0 250 2.2 950 3503T
MLV1210E3
www.vishay.com
Vishay BCcomponents
Revision: 30-Apr-15
2
Document Number: 29127
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIIMENSIONS in millimeters
RECOMMENDED FOOTPRINT in millimeters
V/I CHARACTERISTICS
T
L
1
W
L
2
L
3
L
4
L
1
WTL
2
and L
3
3.2 ± 0.2 2.5 ± 0.25 1.8 max. 0.71 max.
C
A
B
ABC
2.7 1.2 3.9
1
10
100
0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000
VOLTAGE (V)
CURRENT (A)
035
025
020
014
004
Max. leakage current
Max. clamping voltage
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 08-Feb-17
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

MLV1210E33503T

Mfr. #:
Manufacturer:
Vishay
Description:
Varistors 1210 35volts 45A 50.4V to 61.6V
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union