OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MP6515GL-P

P1-P3P4-P6P7-P9P10-P12P13-P13
MP6515
35V, 2.8A, Phase/Enable Control
H-Bridge Motor Driver
in QFN 3x4 and TSSOP-EP Packages
MP6515 Rev. 1.02 www.MonolithicPower.com 1
9/18/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2017 MPS. All Rights Reserved.
The Future of Analog IC Technology
DESCRIPTION
The MP6515 is an H-bridge motor driver. It
operates from a supply voltage of up to 35V
and delivers motor current up to 2.8A. Typically,
the MP6515 is used to drive a DC brush motor.
For the MP6515, control of the outputs is
accomplished through the PHASE, ENBL,
BRAKE, and BMODE pins.
An internal current sensing circuit provides an
output with voltage proportional to the load
current. In addition, cycle-by-cycle current
regulation/limiting is provided. These features
do not require the use of a low-ohm shunt
resistor.
Internal safety features include over-current
protection, input over-voltage protection, under-
voltage lockout (UVLO), and thermal shutdown.
The MP6515 is available in 16-pin
5.0mmx6.4mm TSSOP-EP and 3mmx4mm
QFN package with exposed thermal pad.
FEATURES
Wide 5.4V to 35V Input Voltage Range
2.8A Peak Output Current
Internal Full H-Bridge Driver
PHASE/ENABLE control, input logic
(PHASE, EN, BRAKE, BMODE)
Cycle-by-Cycle Current Regulation/Limit
Low On Resistance (HS:250m;LS:250m)
Simple, Versatile Logic Interfaces
3.3V and 5V Compatible Logic Supply
Over-Current Protection
Over-Voltage Protection
Thermal Shutdown
Under-Voltage Lockout
Fault Indication Output
Thermally Enhanced Surface-Mount
Package
APPLICATIONS
Solenoid Drivers
DC Brush Motor Drive
A
ll MPS parts are lead-free, halogen free, and adhere to the RoHS directive. Fo
r
MPS green status, please visit MPS website under Quality Assurance. “MPS”
and “The Future of Analog IC Technology” are Registered Trademarks o
f
Monolithic Power Systems, Inc.
TYPICAL APPLICATION
MP6515 – 35V, 2.8A, PHASE/ENABLE CONTROL, H-BRIDGE MOTOR DRIVER
MP6515 Rev. 1.02 www.MonolithicPower.com 2
9/18/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2017 MPS. All Rights Reserved.
ORDERING INFORMATION
Part Number* Package Top Marking
MP6515GF*
TSSOP-16 EP (5.0mm × 6.4mm)
See Below
MP6515GL**
QFN-20 (3mm x 4mm)
See Below
* For Tape & Reel, add suffix –Z (e.g. MP6515GF–Z)
** For Tape & Reel, add suffix –Z (e.g. MP6515GL–Z)
TOP MARKING (TSSOP-16EP)
MPS: MPS prefix
YY: Year code
WW: Week code
MP6515: Part number
LLLLLL: Lot number
TOP MARKING (QFN-20)
MP: MPS prefix
Y: Year code
W: Week code
6515: First four digits of the part number
LLL: Lot number
MP6515 – 35V, 2.8A, PHASE/ENABLE CONTROL, H-BRIDGE MOTOR DRIVER
MP6515 Rev. 1.02 www.MonolithicPower.com 3
9/18/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2017 MPS. All Rights Reserved.
PACKAGE REFERENCE
TSSOP-16 EP (5.0mm × 6.4mm) QFN-20 (3mm x 4mm)
ABSOLUTE MAXIMUM RATINGS
(1)
Supply voltage (V
IN
) ....................... –0.3V to 40V
OUTx voltage (V
OUT1/2
) .................... -0.7V to 40V
VCP, CPB ................................... V
IN
to V
IN
+6.5V
ESD Rating (HBD) ....................................... 2kV
ISET ............................................... -0.3V to 4.5V
All other pins to GND ..................... -0.3V to 6.5V
Continuous power dissipation (T
A
= +25°C)
(2)
TSSOP-16 EP……………………………...2.77W
QFN-20 (3mmx4mm)……………….…….2.60W
Storage temperature ................ -55C to +150C
Junction temperature ............................. +150C
Lead temperature (solder) ..................... +260C
Recommended Operating Conditions
(3)
Supply voltage (V
IN
) ......................... 5.4V to 35V
Continuous output current (I
OUT
) ............ ±1.5A
(4)
Load current (I
VISEN
) .................................. ±2mA
Operating junction temp. (T
J
). .. -40°C to +125°C
Thermal Resistance
(5)
θ
JA
θ
JC
TSSOP-16 EP .................... 45 ...... 10 C/W
QFN-20 (3mmx4mm)............. 48 ....... 10 C/W
Notes:
1) Exceeding these ratings may damage the device.
2) The maximum allowable power dissipation is a function of the
maximum junction temperature T
J
(MAX), the junction-to-
ambient thermal resistance
JA
, and the ambient temperature
T
A
. The maximum allowable continuous power dissipation at
any ambient temperature is calculated by P
D
(MAX) = (T
J
(MAX)-T
A
)/
JA
. Exceeding the maximum allowable powe
r
dissipation will cause excessive die temperature, and the
regulator will go into thermal shutdown. Internal thermal
shutdown circuitry protects the device from permanent
damage.
3) The device is not guaranteed to function outside of its
operating conditions.
4) Continuous current depends on PCB layout and ambient
temperature.
5) Measured on JESD51-7, 4-layer PCB
P1-P3P4-P6P7-P9P10-P12P13-P13

MP6515GL-P

Mfr. #:
Buy MP6515GL-P
Manufacturer:
Monolithic Power Systems (MPS)
Description:
Motor / Motion / Ignition Controllers & Drivers 35V 2.8A H-Bridge Motor Driver
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet