CCBRPG04

1
MODELS ZUJ AND ZUL - LARGE THRU-BORE ROTARY PULSE GENERATORS
FOR MOTOR FEEDBACK
SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
1. SUPPLY VOLTAGE: 4.75 to 28 VDC @ 100 mA max. -20°C to 85°C;
4.75 to 24 VDC @ 100 mA max. -20°C to 105°C
2. OUTPUTS: Line driver, V
OH
= 40 VDC max.; 20 mA max. current.
Incremental - two square waves with A leading B for clockwise rotation. B
leads output A for the reverse phased.
Note: Line driver outputs are intended for motion controllers that have line
driver receivers.
3. MAX. PULSE RATE: 250 KHz
4. INDEX: NPN Open Collector Transistor, V
OH
= 30 VDC max.; 20 mA
max. current. Once per revolution centered over output Channel A. Index
is a positive going pulse.
5. MINIMUM EDGE SEPARATION: 45° electrical min, 63° electrical or
better typical
6. RISE TIME: Less than 1 microsecond
7. ACCURACY: Within 0.1° mechanical from one cycle to any other cycle,
or 6 arc minutes.
MECHANICAL SPECIFICATIONS
1. MAXIMUM MECHANICAL SPEED: 4000 RPM
2. BORE SIZE: 0.625" or 1.0" (15.875 or 25.4 mm)
3. BORE TOLERANCES: -0.0000"/+0.0008"
4. USER SHAFT TOLERANCES:
Radial Runout: 0.005" max
Axial Endplay: +/- 0.050" max
5. MAXIMUM ACCELERATION: 1X10
5
rad/sec
2
6. STARTING TORQUE: 4.0 oz-in typical (28.24 N-mm)
7. MOMENT OF INERTIA:
7.6 x 10
-4
oz-in-sec
2
8. ELECTRICAL CONNECTOR: 10-pin MS type connector
FUNCTION PIN CABLE WIRE COLOR
+VDC D RED
COM F BLACK
DATA A A WHITE
DATA A
H BROWN
DATA B B BLUE
DATA B
I VIOLET
DATA Z C ORANGE
DATA Z
J YELLOW
SHIELD - BARE
N/A G GREEN
9. HOUSING: Proprietary nylon composite
10. MOUNTING: 3.5" to 5.90" B.C. (4.5" C-Face) tether arm kit
11. WEIGHT: 8 oz. (226.7 g)
ENVIRONMENTAL SPECIFICATIONS
1. OPERATING TEMPERATURE: -20°C to 105°C (See Supply Voltage)
2. STORAGE TEMPERATURE: -20°C to 85°C
3. HUMIDITY: 98% RH non-condensing
4. VIBRATION: 20 g @ 5 to 2000 Hz
5. SHOCK: 80 g @ 11 msec duration
6. SEALING: IP66
Bulletin No. ZUJ/ZUL-C
Drawing No. LP0746
Released 02/13
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
www.redlion.net
GENERAL DESCRIPTION
The ZUJ and ZUL are high performance units that are ideal for fast revving
motor mount applications. The injection molded housing is grooved with
“cooling fins”, and can take the extreme heat of the motion control industry.
The unit comes equipped with a 3.5" to 5.90" B.C. tether arm to mount to a
4.5" motor face.
This revolutionary encoder can also be adapted to various standard and metric
sized motor shafts by using individual sleeves (Sold separately).
Electrically the unit offers line driver outputs, limited to 20 mA per channel.
The outputs are standard quadrature with index and are also available with
reverse phasing for the typical motor drive controller application. The separation
is 90° with output A leading output B for clockwise rotation. Output B leads
output A for the reverse phased output, for clockwise rotation.
1.75 (44.5)
2.95 (74.9)
15°
1.000 (25.4)
3.44
(87.4)
0.450 (11.43)
(10.16)
(41.91)
(50.8)
2.50
THRU AND BLIND BORES
(See Ordering Information)
(38.1)
BLIND BORE
DEPTH
2.375 (60.33)
1.65
0.40
1.50
2.00
DIMENSIONS In inches (mm)
ACCESSORIES
MODEL NO. DESCRIPTION PART NUMBER
CCBRPG
10-Pin MS Connector CCBRPG04
10-Pin MS Connector with 10 ft 24 AWG
9 Conductor Cable w/drain
CCBRPG05
10-Pin MS Connector with 20 ft 24 AWG
9 Conductor Cable w/drain
CCBRPG06
RPGBSI
0.500 Inch Bore Sleeve RPGBSI00
0.625 Inch Bore Sleeve RPGBSI01
0.750 Inch Bore Sleeve RPGBSI02
0.875 Inch Bore Sleeve RPGBSI03
RPGBSM
19 mm Bore Sleeve RPGBSM00
20 mm Bore Sleeve RPGBSM01
24 mm Bore Sleeve RPGBSM02
25 mm Bore Sleeve RPGBSM03
RPGMK
Standard Tether Arm Kit 4.5 Inch RPGMK002
Elongated Tether Arm Kit 8.5 Inch RPGMK003
RPGMB *
Magnetic Coupling Kit (0.625 inch shaft) RPGMB001
RPGPC
56C Protective Cover RPGPC000
* ZUL encoders require 0.625 " bore sleeve to accomodate magnetic coupling.
ORDERING INFORMATION
MODEL NO.
0.625" Thru-Bore Rotary Pulse
Generators For Motor Feedback
1024 ZUJ1024Z
2048 ZUJ2048Z
DESCRIPTION
1024 ZUL1024Z
PPR PART NUMBER
2048 ZUL2048Z
ZUL
ZUJ
1" Thru-Bore Rotary Pulse
Generators For Motor Feedback
Only factory stocked part numbers are listed. Consult Factory for part number
and availability of other PPR and output configurations.
Do not dispose of unit in trash - Recycle
LIMITED WARRANTY
The Company warrants the products it manufactures against defects in materials and workmanship
for a period limited to two years from the date of shipment, provided the products have been stored,
handled, installed, and used under proper conditions. The Company’s liability under this limited
warranty shall extend only to the repair or replacement of a defective product, at The Company’s
option. The Company disclaims all liability for any affirmation, promise or representation with
respect to the products.
The customer agrees to hold Red Lion Controls harmless from, defend, and indemnify RLC against
damages, claims, and expenses arising out of subsequent sales of RLC products or products
containing components manufactured by RLC and based upon personal injuries, deaths, property
damage, lost profits, and other matters which Buyer, its employees, or sub-contractors are or may be
to any extent liable, including without limitation penalties imposed by the Consumer Product Safety
Act (P.L. 92-573) and liability imposed upon any person pursuant to the Magnuson-Moss Warranty
Act (P.L. 93-637), as now in effect or as amended hereafter.
No warranties expressed or implied are created with respect to The Company’s products except
those expressly contained herein. The Customer acknowledges the disclaimers and limitations
contained herein and relies on no other warranties or affirmations.
Red Lion Controls
Headquarters
20 Willow Springs Circle
York PA 17406
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
Red Lion Controls
China
Unit 302, XinAn Plaza
Building 13, No.99 Tianzhou Road
ShangHai, P.R. China 200223
Tel +86 21 6113 3688
Fax +86 21 6113 3683
Red Lion Controls
Europe
Softwareweg 9
NL - 3821 BN Amersfoort
Tel +31 (0) 334 723 225
Fax +31 (0) 334 893 793
Red Lion Controls
India
201-B, 2nd Floor, Park Centra
Opp 32 Mile Stone, Sector-30
Gurgaon-122002 Haryana, India
Tel +91 984 487 0503

CCBRPG04

Mfr. #:
Manufacturer:
Description:
10-PIN CONNECTOR
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet