OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

NSV45060JDT4G

P1-P3P4-P6P7-P8
© Semiconductor Components Industries, LLC, 2014
April, 2014 − Rev. 3
1 Publication Order Number:
NSI45060JD/D
NSI45060JDT4G
Adjustable Constant Current
Regulator & LED Driver
45 V, 60 − 100 mA + 15%, 2.7 W Package
The adjustable constant current regulator (CCR) is a simple,
economical and robust device designed to provide a cost effective
solution for regulating current in LEDs (similar to Constant Current
Diode, CCD). The CCR is based on Self-Biased Transistor (SBT)
technology and regulates current over a wide voltage range. It is
designed with a negative temperature coefficient to protect LEDs from
thermal runaway at extreme voltages and currents.
The CCR turns on immediately and is at 20% of regulation with
only 0.5 V Vak. The R
adj
pin allows I
reg(SS)
to be adjusted to higher
currents by attaching a resistor between R
adj
(Pin 3) and the Cathode
(Pin 4). The R
adj
pin can also be left open (No Connect) if no
adjustment is required. It requires no external components allowing it
to be designed as a high or low−side regulator. The high anode-
cathode voltage rating withstands surges common in Automotive,
Industrial and Commercial Signage applications. This device is
available in a thermally robust package and is qualified to stringent
AEC−Q101 standard, which is lead-free RoHS compliant and uses
halogen-free molding compound, and UL94−V0 certified.
Features
• Robust Power Package: 2.7 Watts
• Adjustable up to 100 mA
• Wide Operating Voltage Range
• Immediate Turn-On
• Voltage Surge Suppressing − Protecting LEDs
• UL94−V0 Certified
• SBT (Self−Biased Transistor) Technology
• Negative Temperature Coefficient
• Eliminates Additional Regulation
• NSV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q101
Qualified and PPAP Capable
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Applications
• Automobile: Chevron Side Mirror Markers, Cluster, Display &
Instrument Backlighting, CHMSL, Map Light
• AC Lighting Panels, Display Signage, Decorative Lighting, Channel
Lettering
• Switch Contact Wetting
• Application Note AND8391/D − Power Dissipation Considerations
• Application Note AND8349/D − Automotive CHMSL
http://onsemi.com
DPAK
CASE 369C
MARKING DIAGRAM
Device Package Shipping
†
ORDERING INFORMATION
NSI45060JDT4G DPAK
(Pb−Free)
2500/Tape & Ree
l
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
s
Brochure, BRD8011/D.
Anode
1
4
Cathode
I
reg(SS)
= 60 − 100 mA
@ Vak = 7.5 V
3
R
adj
1
2
3
4
1
Y = Year
WW = Work Week
NSI60J = Specific Device Code
G = Pb−Free Package
C
A
R
adj
YWW
NSI
60JG
NSV45060JDT4G DPAK
(Pb−Free)
2500/Tape & Ree
l
NSI45060JDT4G
http://onsemi.com
2
MAXIMUM RATINGS (T
A
= 25°C unless otherwise noted)
Rating
Symbol Value Unit
Anode−Cathode Voltage Vak Max 45 V
Reverse Voltage V
R
500 mV
Operating and Storage Junction Temperature Range T
J
, T
stg
−55 to +175 °C
ESD Rating: Human Body Model
Machine Model
ESD Class 3A (4000 V)
Class B (200 V)
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
ELECTRICAL CHARACTERISTICS (T
A
= 25°C unless otherwise noted)
Characteristic
Symbol Min Typ Max Unit
Steady State Current @ Vak = 7.5 V (Note 1) I
reg(SS)
51 60 69 mA
Voltage Overhead (Note 2) V
overhead
1.8 V
Pulse Current @ Vak = 7.5 V (Note 3) I
reg(P)
54.7 66 76.95 mA
Capacitance @ Vak = 7.5 V (Note 4) C 17 pF
Capacitance @ Vak = 0 V (Note 4) C 70 pF
1. I
reg(SS)
steady state is the voltage (Vak) applied for a time duration ≥ 80 sec, using FR−4 @ 300 mm
2
2 oz. Copper traces, in still air.
2. V
overhead
= V
in
− V
LEDs
. V
overhead
is typical value for 65% I
reg(SS)
.
3. I
reg(P)
non−repetitive pulse test. Pulse width t ≤ 1 msec.
4. f = 1 MHz, 0.02 V RMS.
Figure 1. CCR Voltage−Current Characteristic
NSI45060JDT4G
http://onsemi.com
3
THERMAL CHARACTERISTICS
Characteristic Symbol Max Unit
Total Device Dissipation (Note 5) T
A
= 25°C
Derate above 25°C
P
D
1771
14.16
mW
mW/°C
Thermal Resistance, Junction−to−Ambient (Note 5)
R
θ
JA
70.6 °C/W
Thermal Reference, Junction−to−Lead 4 (Note 5)
R
ψ
JL4
6.8 °C/W
Total Device Dissipation (Note 6) T
A
= 25°C
Derate above 25°C
P
D
2083
16.67
mW
mW/°C
Thermal Resistance, Junction−to−Ambient (Note 6)
R
θ
JA
60 °C/W
Thermal Reference, Junction−to−Lead 4 (Note 6)
R
ψ
JL4
6.3 °C/W
Total Device Dissipation (Note 7) T
A
= 25°C
Derate above 25°C
P
D
2080
16.64
mW
mW/°C
Thermal Resistance, Junction−to−Ambient (Note 7)
R
θ
JA
60.1 °C/W
Thermal Reference, Junction−to−Lead 4 (Note 7)
R
ψ
JL4
6.5 °C/W
Total Device Dissipation (Note 8) T
A
= 25°C
Derate above 25°C
P
D
2441
19.53
mW
mW/°C
Thermal Resistance, Junction−to−Ambient (Note 8)
R
θ
JA
51.2 °C/W
Thermal Reference, Junction−to−Lead 4 (Note 8)
R
ψ
JL4
5.9 °C/W
Total Device Dissipation (Note 9) T
A
= 25°C
Derate above 25°C
P
D
2309
18.47
mW
mW/°C
Thermal Resistance, Junction−to−Ambient (Note 9)
R
θ
JA
54.1 °C/W
Thermal Reference, Junction−to−Lead 4 (Note 9)
R
ψ
JL4
6.2 °C/W
Total Device Dissipation (Note 10) T
A
= 25°C
Derate above 25°C
P
D
2713
21.71
mW
mW/°C
Thermal Resistance, Junction−to−Ambient (Note 10)
R
θ
JA
46.1 °C/W
Thermal Reference, Junction−to−Lead 4 (Note 10)
R
ψ
JL4
5.7 °C/W
Junction and Storage Temperature Range T
J
, T
stg
−55 to +175 °C
NOTE: Lead measurements are made by non−contact methods such as IR with treated surface to increase emissivity to 0.9.
Lead temperature measurement by attaching a T/C may yield values as high as 30% higher °C/W values based upon empirical
measurements and method of attachment.
5. FR−4 @ 300 mm
2
, 1 oz. copper traces, still air.
6. FR−4 @ 300 mm
2
, 2 oz. copper traces, still air.
7. FR−4 @ 500 mm
2
, 1 oz. copper traces, still air.
8. FR−4 @ 500 mm
2
, 2 oz. copper traces, still air.
9. FR−4 @ 700 mm
2
, 1 oz. copper traces, still air.
10.FR−4 @ 700 mm
2
, 2 oz. copper traces, still air.
P1-P3P4-P6P7-P8

NSV45060JDT4G

Mfr. #:
Buy NSV45060JDT4G
Manufacturer:
ON Semiconductor
Description:
LED Lighting Drivers DPAK 60MA
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet