AC4486-5M-485

global solutions:
local support
TM
Innovative Technology
for a Connected World
AC4486
868MHz Radio Module
THE FASTEST WAY TO WIRELESS
Compact, low-cost 868MHz radio modules can replace miles of cable in harsh industrial
environments. Using eld-proven technology that needs no additional ETSI (Europe)
licensing, OEMs with little or no previous RF experience can easily make existing
systems wireless.
AC4486s feature a number of on-the-y control commands, providing OEMs with a very
versatile interface for any application. The modules can be used as direct wire replacements,
requiring no special host software for communication. All synchronization and RF system
data transmission/reception is performed by the radio module.
AC4486s operate in a point-to-point or point-to-multipoint, client/server or peer-to-peer
architecture. They are (socket-compatible network-wide) with 2.4GHz and 900MHz models,
preserving OEMs’ hardware/software investments while providing solutions that meet
different market, regulatory and environmental needs.
FEATURES
• Approved for European use
Seamless cable-to-radio module replacement
• High 868MHz data rate: 76.8 Kbps
• Small form factor: 1.65 x 1.9 inches
• Operates in –40ºC to +80ºC temperatures
• Socket-compatible with 2.4GHz models
MARKETS
• Recreation Areas
• Pool & Spa Control
• Point of Sale
• Gaming Devices
• Utilities Management
USA: +1.800.492.2320
Europe: +44.1628.858.940
Asia: +852.2268.6567
wirelessinfo@lairdtech.com
www.lairdtech.com/wireless
Innovative Technology
for a Connected World
AC4486
868MHz Radio Module
FLEXIBLE RF PROTOCOL
Laird Technologies’ embedded transparent protocol simplies the OEM’s integration process by utilizing drop-in installation. As each
radio module receives raw data, it manages its over-the-air protocol to assure successful communication. Headers, data packet length,
and CRCs are not required. The RF232 supports simple cable-replacement to complex peer-to-peer congurations; and broadcast
communication to all radio modules or address packets to a specic destination using unique MAC addresses embedded in
each radio module.
LWS-SPEC-AC4486 0309
Any information furnished by Laird Technologies and its agents is believed to be accurate and reliable. Responsibility for the use and application of Laird Technologies materials
rests with the end user since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the tness, merchant-
ability, or suitability of any Laird Technologies materials or products for any specic or general uses. Laird Technologies shall not be liable for incidental or consequential
damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies terms and conditions of sale in effect from time to time, a copy of which will
be furnished upon request. For further information please visit our website at www.lairdtech.com. Alternatively contact: wirelessinfo@lairdtech.com. Bluetooth
®
is a trademark
owned by Bluetooth SIG, Inc., USA and licensed to Laird Technologies.
© 2009 All Rights Reserved. Laird Technologies is a registered trademark of Laird Technologies, Inc..
SPECIFICATIONS
Parameter AC4486–5
Interface 20-pin mini connector
Frequency 869.7-869.65 MHz
Modulation FSK
Serial interface options 3V TTL
Serial interface data rate Up to 115.2 Kbps
Output power (w/ 2dBi antenna) 5mW variable
Power consumption (transmit/receive) 40mA typical
Security One-byte system ID
Sensitivity (w/ 2dBi antenna) -100 dB typical @ 76.8 Kbps RF Data Rate
Voltage 3.3V nominal +/-2%, +/-30mV
Range Up to 1000 meters line of sight
Temperature -40º to +80ºC
Humidity (non-condensing) 10% to 90%
Dimensions 1.90 x 1.65 x 0.20”
(49 x 42 x 5 mm)
Weight < 0.75 oz (< 21 g)
Antenna External MMCX connector
RF PROTOCOL MODES
a) Communication
Unicast (one-to-one addressing)
Broadcast (one-to-multiple addressing)
b) Acknowledgement mode (ACK)
API with hardware and/or software
ACK indication
INTERFACE PROTOCOL
a) On-the-y radio module conguration:
Destination address
RF transmit power
Broadcast/addressed
b) 9-bit serial interface mode
c) A/D, D/A generic I/Os
d) Variable baud rate
e) RF packet size, timeout control
f) Onboard temperature sensor
g) Handshaking, CTS/RTS
h) In-range indicator
i) Error detection
Onboard CRC
Duplicate packet ltering
j) Data encryption standard (DES)
The details contained within the document are
subject to change. Download the product specication
from www.lairdtech.com/wireless for the most current
specication.
ORDERING INFORMATION
AC4486 - 5M 868MHz transceiver, TTL serial RS232, 0–250mW, -40º to +80º C, MMCX antenna
AC4486 - 5M - 485 868MHz transceiver, TTL serial RS485, 0–250mW, -40º to +80º C, MMCX antenna
AC4486 - 5A 868MHz transceiver, TTL serial RS232, 0–250mW, -40º to +80º C, integral antenna
AC4486 - 5A - 485 868MHz transceiver, TTL serial RS485, 0–250mW, -40º to +80º C, integral antenna

AC4486-5M-485

Mfr. #:
Manufacturer:
Laird Connectivity
Description:
RF Modules 5mW Transceiver Module RS485
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet