OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

HCPL-4502-300E

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P16
7
Regulatory Information
The devices contained in this data sheet have been approved by the following organizations:
UL
Recognized under UL 1577, Component Recognition
Program, File E55361.
CSA
Approved under CSA Component Acceptance Notice #5,
File CA 88324.
IEC/EN/DIN EN 60747-5-5 (HCNW and option 060 only)
Approved with Maximum Working Insulation Voltage
V
iorm
=560V
peak
for HCPL-0452/0453,
V
iorm
=630 V
peak
for HCPL-4502/4503, and
V
iorm
=1414 V
peak
for HCNW4502/4503.
Insulation and Safety Related Specications
8-Pin DIP Widebody
(300 Mil) SO-8 (400 Mil)
Parameter Symbol Value Value Value Unit Conditions
Minimum External L(101) 7.1 4.9 9.6 mm Measured from input terminals
Air Gap (External to output terminals, shortest
Clearance) distance through air.
Minimum External L(102) 7.4 4.8 10.0 mm Measured from input terminals
Tracking (External to output terminals, shortest
Creepage) distance path along body.
Minimum Internal 0.08 0.08 1.0 mm Through insulation distance,
Plastic Gap conductor to conductor, usually
(Internal Clearance) the direct distance between the
photoemitter and photodetector
inside the optocoupler cavity.
Minimum Internal NA NA 4.0 mm Measured from input terminals
Tracking (Internal to output terminals, along
Creepage) internal cavity.
Tracking Resistance CTI > 175 > 175 > 175 V DIN IEC 112/VDE 0303 Part 1
(Comparative
Tracking Index)
Isolation Group IIIa IIIa IIIa Material Group
(DIN VDE 0110, 1/89, Table 1)
Option 300 - surface mount classication is Class A in accordance with CECC 00802.
Solder Reow Prole
Recommended reow condition as per JEDEC Standard, J-STD-020 (latest revision). Non-Halide Flux should
be used.
8
IEC/EN/DIN EN 60747-5-5 Insulation Related Characteristics (HCNW4502/3 ONLY)
Description Symbol Characteristic Units
Installation classication per DIN VDE 0110/39, Table 1
for rated mains voltage ≤600 V rms I-IV
for rated mains voltage ≤1000 V rms I-III
Climatic Classication 55/85/21
Pollution Degree (DIN VDE 0110/39) 2
Maximum Working Insulation Voltage V
IORM
1414 V
peak
Input to Output Test Voltage, Method b*
V
IORM
x 1.875 = V
PR
, 100% Production Test with t
m
= 1 sec, V
PR
2652 V
peak
Partial Discharge < 5 pC
Input to Output Test Voltage, Method a*
V
IORM
x 1.6 = V
PR
, Type and sample test, V
PR
2262 V
peak
t
m
= 10 sec, Partial Discharge < 5 pC
Highest Allowable Overvoltage*
(Transient Overvoltage, t
ini
= 60 sec) V
IOTM
8000 V
peak
Safety Limiting Values
(Maximum values allowed in the event of a failure,
also see Figure 9, Thermal Derating curve.)
Case Temperature T
S
150 °C
Input Current I
S,INPUT
400 mA
Output Power P
S,OUTPUT
700 mW
Insulation Resistance at T
S
, V
IO
= 500 V R
S
≥ 10
9
Ω
*Refer to the front of the optocoupler section of the current catalog, under Product Safety Regulations section IEC/EN/DIN EN 60747-5-5, for a
detailed description.
Note: Isolation characteristics are guaranteed only within the safety maximum ratings which must be ensured by protective circuits in application.
IEC/EN/DIN EN 60747-5-5 Insulation Related Characteristics (OPTION 060 ONLY)
Characteristic
Description Symbol HCPL-4502/4503 HCPL-0452/0453 Units
Installation classication per DIN VDE 0110/39, Table 1
for rated mains voltage ≤ 300 V
rms
I-IV I-IV
for rated mains voltage ≤ 600 V
rms
I-IV I-I I I
Climatic Classication 55/100/21 55/100/21
Pollution Degree (DIN VDE 0110/39) 2 2
Maximum Working Insulation Voltage V
IORM
630 560 V
peak
Input to Output Test Voltage, Method b*
V
IORM
x 1.875 = V
PR
, 100% Production Test with t
m
= 1 sec, V
PR
1181 1050 V
peak
Partial Discharge < 5 pC
Input to Output Test Voltage, Method a*
V
IORM
x 1.6 = V
PR
, Type and sample test, V
PR
1008 896 V
peak
t
m
= 10 sec, Partial Discharge < 5 pC
Highest Allowable Overvoltage*
(Transient Overvoltage, t
ini
= 60 sec) V
IOTM
8000 6000 V
peak
Safety Limiting Values
(Maximum values allowed in the event of a failure,
also see Figure 9, Thermal Derating curve.)
Case Temperature T
S
175 175 °C
Input Current I
S,INPUT
230 150 mA
Output Power P
S,OUTPUT
600 600 mW
Insulation Resistance at T
S
, V
IO
= 500 V R
S
≥10
9
≥10
9
Ω
9
Absolute Maximum Ratings
Parameter Symbol Device Min. Max. Units Note
Storage Temperature T
S
-55 125 °C
Operating Temperature T
A
8-Pin DIP -55 100 °C
SO-8
Widebody -55 85
Average Forward Input Current I
F(AVG)
25 mA 1
Peak Forward Input Current I
F(PEAK)
8-Pin DIP 2
(50% duty cycle, 1 ms pulse width) SO-8 50 mA
(50% duty cycle, 1 ms pulse width) Widebody 40
Peak Transient Input Current I
F(TRANS)
8-Pin DIP 1 A
(≤1 µs pulse width, 300 pps) SO-8
Widebody 0.1
Reverse LED Input Voltage (Pin 3-2) V
R
8-Pin DIP 5 V
SO-8
Widebody 3
Input Power Dissipation P
IN
8-Pin DIP 45 mW 3
SO-8
Widebody 40
Average Output Current (Pin 6) I
O(AVG)
8 mA
Peak Output Current I
O(PEAK)
16 mA
Emitter-Base Reverse Voltage V
EBR
5 V
(Pin 5-7, except 4502/3, 0452/3)
Supply Voltage (Pin 8-5) V
CC
-0.5 30 V
Output Voltage (Pin 6-5) V
O
-0.5 20 V
Base Current (Pin 7, except 4502/3, 0452/3) I
B
5 mA
Output Power Dissipation P
O
100 mW 4
Lead Solder Temperature
(Through-Hole Parts Only)
1.6 mm below seating plane, 10 seconds T
LS
8-Pin DIP 260 °C
up to seating plane, 10 seconds Widebody 260 °C
Reow Temperature Prole T
RP
SO-8 and
Option 300
See Package Outline Drawings
section
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P16

HCPL-4502-300E

Mfr. #:
Buy HCPL-4502-300E
Manufacturer:
Broadcom / Avago
Description:
High Speed Optocouplers 1MBd 1Ch 16mA
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet