DIPPED RADIAL LEAD MULTILAYER CERAMIC CAPACITORS
◆SPECIFICATIONS
10 Temperature Cycle
For 5 cycles for above temperature cycle.
11 Humidity Load Life
12 Endurance
Appearance : No abnormality.
ΔC/C :±20%
D.F. : 10% maximum
I.R. : 25/C
R(MΩ) or 1000(MΩ)
whichever is less.
Appearance : No abnormality.
ΔC/C :±15%
D.F. : To meet the initial specification.
I.R. : To meet the initial specification.
Appearance : No abnormality.
ΔC/C :±20%
D.F. : 10% maximum
I.R. : 50/C
R(MΩ) or 1000(MΩ)
whichever is less.
Temperature : 40±2
℃
Humidity : 90 to 95%RH
Voltage : Rated voltage
Time : 500± hours
24
Temperature : 125±3
℃
Voltage : Rated voltage
Time : 1000± hours
48
Step
1
2
Temperature (
℃
)
Min. Category temperature ±3
Room temperature
(min.)
30±3
3 max.
3
4
Max. Category temperature ±3
Room temperature
30±3
3 max.
0
0
*CR : Rated Capacitance(µF)
5 Rated Ripple Current
10kHz to 1MHz (sine curve)
Ripple voltage Vp shall be less than the rated voltage.
Test ConditionSpecificationItemsNo.
8 Solderability
shall be covered with new solder.
Solder Temperature : 350±10
℃
Resistance to Soldering Heat9
Dipping Time : 3±0.5 sec.
Depth : 1.5 to 2mm
Tension
Bending
6
7
Robustness
of
Terminations
Vibration
No visible damage.
See STANDARD RATINGS
Appearance : No abnormality.
Capacitance : To meet the initial
specification.
D.F. : To meet the initial specification.
Time : 2times.
The force applied shall be :
Amplitude : 1.5mm
Frequency range : 10-55-10Hz (1 min)
Direction and time :
2 hours each to X, Y, Z axis. Total 6 hours.
Leadφ (mm)
0.5 max.
Tensile(N)
5
(sec.)
10±1
0.6 min. 10 10±1
Leadφ (mm)
0.5 max.
Bending(N)
2.5
(kg)
0.25
0.6 min. 5 0.51
Solder
Solder Temperature
Dipping Time
Pb Free
245±5
℃
2±0.5sec.
NTD
Series
Please refer to"Part Numbering System" of the beginning of a catalog for the details.
◆DIMENSIONS
Crimped lead
32 to 76 Size
Straight lead
For all size
L
F
W
15min.
T
d
L
F
W
15min.
T
d
◆PART NUMBERING SYSTEM
Supplement code
Taping code
Terminal code
Size code
Capacitance tolerance code
Nominal Capacitance code
Temperature characteristics code
Rated voltage code
Series code
Category
K T D 5 0 0 B 1 0 6 M 5 5 0 T 0 0A
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
Min. 75% of surface of the termination
Appearance : No abnormality.
ΔC/C :±15%
D.F. : To meet the initial specification.
I.R. : To meet the initial specification.