B51
Ribbon Cable Connector (Pin Header)
HIF3E Series
■Features
1. Product Variation
The straight type connector is connected vertical to the
printed board, and the right angle type connector is
connected horizontal to the printed board.
2. Compatibility
This pin header is compatible with HIF3B series.
■Applications
Computers, terminal equipment, PPC, various kinds of
electronic equipment, business machines, etc.
500V DC
650V AC/1 minute
0.1A
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
500 cycles
Solder Bath: 260ç for 10 seconds
Manual soldering: 360ç for 5 seconds
(–55ç: 30 minutes ➝15 to 35ç: 5 minutes max.
125ç: 30 minutes ➝15 to 35ç: 5 minutes max.) 5 cycles
1000M ohms min.
No flashover or insulation breakdown.
15m ohms max.
No electrical discontinuity of 1μs or more
Insulation resistance: 1000M ohms min.
Contact resistance: 15m ohms max.
No deformation of components affecting performance.
No damage, cracks, or parts looseness.
1.
Insulation Resistance
2.
Withstanding voltage
3.
Contact Resistance
4. Vibration
5.
Humidity (Steady state)
7.
Durability (Mating/un-mating)
8.
Resistance to Soldering heat
6.
Temperature Cycle
Rating
Current rating: 1A
Voltage rating: 200V AC
Operating Temperature Range:–55 to +85ç (Note 1)
Operating Moisture Range:40 to 80%
Storage Temperature Range:–10 to +60ç (Note 2)
Storage Humidity Range:40 to 70% (Note 2)
■Product Specifications
Item Specification Condition
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range
and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: Information contained in this catalog represents general requirements for this Series.Contact us for the drawings and
specifications for a specific part number shown.
■Material
Part Material Finish Remarks
Insulator
Contact
PBT
Brass
■Ordering Information
HIF3E - * P A -
2.54 DS
1 2 53 4 6
Series Name: HIF3E
P: Pin header
A: Selective gold plating
Contact Pitch: 2.54mm
1
2
5
6
3
4
Contact type DSS: Right angle type
DSA: Straight type
Black
Selective gold plating over nickel underplated
UL94V-0
---------------
Number of contacts: 8, 10, 12, 16, 18, 20,
26, 30, 34, 40, 50, 60
Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
